Mastfuß und Verlängerung Windsurf
Kaufberatung
Der Mastfuß und die Mastverlängerung sind entscheidende Bauteile deines Windsurf-Riggs und sorgen für eine sichere, stabile Verbindung zwischen Board und Segel. Der Mastfuß hält den Mast über eine Universal-Gelenkverbindung flexibel mit dem Brett verbunden, sodass du das Segel in alle Richtungen frei bewegen kannst. Hochwertige Mastfüße bieten eine robuste Bauweise, leichte Bedienbarkeit und hohe Zuverlässigkeit – wichtig für Sicherheit und Komfort auf dem Wasser. Die Mastverlängerung wird verwendet, um die optimale Länge deines Masts an verschiedene Segelgrößen anzupassen. Je nach Setup kannst du so dein Rigging perfekt feinjustieren, ohne gleich einen neuen Mast zu benötigen. Bei Surfdeal findest du eine sorgfältig ausgewählte Palette an Mastfüßen und Verlängerungen für verschiedene Systeme wie SDM und RDM, damit dein Windsurf-Rigg perfekt eingestellt und jederzeit zuverlässig einsatzbereit ist.
Produkte filtern
dazugehöriges Quickrelease: 00.00.80 kompatibel mit Neil Pryde / Gaastra / Sunshine
dazugehöriges Quickrelease: 00.00.80 kompatibel mit Neil Pryde / Gaastra / Sunshine
dazugehöriges Quickrelease: 00.00.80 kompatibel mit Neil Pryde / Gaastra / Sunshine
dazugehöriges Quickrelease: 00.00.80 kompatibel mit Neil Pryde / Gaastra / Sunshine
THE BASE EXTENSION 40 HAS BEEN DEVELOPED ALONGSIDE OUR INTENSIVE RACE PROGRAM. This product allows a shorter, softer mast to be used in certain sails to improve control and extend the wind range. The BASE EXTENSION 40 can also be used as a functional recreational product to increase mast length without updating your mast.
The CYCLOPS extension has a single pulley for rapid loop 'n go rigging. Simply pass the loop of rope through the tack pulley on the sail and hook it over the single pulley on the extension. A single pull applies full downhaul tension in seconds. All the ropes and pulleys are kept in perfect alignment to eliminate a lot of the friction and makes up for any loss of leverage from less pulleys.A built-in handle negates the need for any tool, and stuff into the downhaul pocket on the sail. Formuline rope is used to further reduce friction and minimize rope wear. Faster, simpler rigging. / SINGLE LOOP-GO PULLEY/ EFFICIENT PULLEY ALIGNMENT/ NEW STAINLESS STEEL AUTOMATIC COLLAR/ STAINLESS STEEL BUTTON AND MECHANISM/ ZERO CM SETTING
The CYCLOPS extension has a single pulley for rapid loop 'n go rigging. Simply pass the loop of rope through the tack pulley on the sail and hook it over the single pulley on the extension. A single pull applies full downhaul tension in seconds. All the ropes and pulleys are kept in perfect alignment to eliminate a lot of the friction and makes up for any loss of leverage from less pulleys.A built-in handle negates the need for any tool, and stuff into the downhaul pocket on the sail. Formuline rope is used to further reduce friction and minimize rope wear. Faster, simpler rigging. / SINGLE LOOP-GO PULLEY/ EFFICIENT PULLEY ALIGNMENT/ NEW STAINLESS STEEL AUTOMATIC COLLAR/ STAINLESS STEEL BUTTON AND MECHANISM/ ZERO CM SETTING
The CYCLOPS extension has a single pulley for rapid loop 'n go rigging. Simply pass the loop of rope through the tack pulley on the sail and hook it over the single pulley on the extension. A single pull applies full downhaul tension in seconds. All the ropes and pulleys are kept in perfect alignment to eliminate a lot of the friction and makes up for any loss of leverage from less pulleys.A built-in handle negates the need for any tool, and stuff into the downhaul pocket on the sail. Formuline rope is used to further reduce friction and minimize rope wear. Faster, simpler rigging. / SINGLE LOOP-GO PULLEY/ EFFICIENT PULLEY ALIGNMENT/ NEW STAINLESS STEEL AUTOMATIC COLLAR/ STAINLESS STEEL BUTTON AND MECHANISM/ ZERO CM SETTING
3 PULLEY RDM EXTENSION. With more people running freeride and slalom sails on RDM masts, the necessity for a 3-pulley RDM extension became obvious. Design focused on reducing downhaul friction for easier rigging. Careful attention to rope alignment and pulley spacing has enabled significant improvements. Perfectly matched to any sail with the 4-roller tack pulley, the Triple Xtension also suits sails with the 3-roller tack pulley. Other features include Dyneema rope and an integrated hook to anchor the tack strap. / ALIGNED TRIPLE PULLEYS/ STAINLESS STEEL BUTTON AND MECHANISM/ STAINLESS STEEL AUTOMATIC HINGED COLLAR SYSTEM/ ZERO CM SETTING
3 PULLEY RDM EXTENSION. With more people running freeride and slalom sails on RDM masts, the necessity for a 3-pulley RDM extension became obvious. Design focused on reducing downhaul friction for easier rigging. Careful attention to rope alignment and pulley spacing has enabled significant improvements. Perfectly matched to any sail with the 4-roller tack pulley, the Triple Xtension also suits sails with the 3-roller tack pulley. Other features include Dyneema rope and an integrated hook to anchor the tack strap. / ALIGNED TRIPLE PULLEYS/ STAINLESS STEEL BUTTON AND MECHANISM/ STAINLESS STEEL AUTOMATIC HINGED COLLAR SYSTEM/ ZERO CM SETTING
WAVE GRENADE CARBON 36 / 24 OUR NO COMPROMISE WAVE GRENADE CARBON HAS BEEN REDESIGNED FOR THE ULTIMATE DURABILITY. Tube diameter and wall thickness have been increased for incredible reliability. WAVE GRENADE HD _36 / 24 HEAVY-DUTY HD stands for Heavy Duty. The new WAVE GRENADE HD has 36cm or 24cm of adjustment for better compatibility with our wave sail range. We analyzed the need for more reliable tubes over this increased length and tested a variety of Aluminum specification. We decided on a wall thickness 33% thicker and an increased outside diameter, for the ultimate durability against bending and breaking.
3 PULLEY RDM EXTENSION. With more people running freeride and slalom sails on RDM masts, the necessity for a 3-pulley RDM extension became obvious. Design focused on reducing downhaul friction for easier rigging. Careful attention to rope alignment and pulley spacing has enabled significant improvements. Perfectly matched to any sail with the 4-roller tack pulley, the Triple Xtension also suits sails with the 3-roller tack pulley. Other features include Dyneema rope and an integrated hook to anchor the tack strap. / ALIGNED TRIPLE PULLEYS/ STAINLESS STEEL BUTTON AND MECHANISM/ STAINLESS STEEL AUTOMATIC HINGED COLLAR SYSTEM/ ZERO CM SETTING
DURABILITY AND FUNCTION From our biggest sails to our smallest components, every SEVERNE product is engineered by windsurfers for durability and function. / BLACK DUAL DENSITY COVERING FOR UV STABILITY/ LOW PROFILE, REDUCING THE GAP BETWEEN THE BOARD AND SAIL/ ERGONOMICALLY SHAPED FOR EASY TIGHTENING AND UN-TIGHTENING/ INNOVATIVE DUAL DENSITY OUTER SHELL FOR COMFORT/ EURO PIN FOR RELIABILITY AND COMPATIBILITY