1500The 1500 is a playful and fast foil for fast turns and higher speed. The 1500 cm2 front wing has a lift of 12 knots (3-4 Beaufort) even with a light wind. The name drive comes from the feeling you get when quad biking. In choppy waters or if you make a mistake, the drive remains trimmed like a 4×4 and does not tip downwards. The propulsion is maintained. The fuselage has an additional position to mount the tailwing further back, which increases length stability for heavy riders or when windfoiling. The production in a premium factory guarantees durability. The titanium screws do not corrode, so you can leave your foil mounted for a very long time without the problem of it coming loose later. The set comes with bag and wing covers that also fit while the foil is mounted.Who is it for?The 1500 is a playful and fast foil for fast turns and higher speeds. The 1500 cm2 front wing has lift even at light wind speeds. For experienced riders from 12 knots (3-4 bft). Specifications: Technical data: 1500 cm2 front wing with 87 cm span; rear wing with a span of 42 cm; 70 cm fuselage; 75 cm mast; The 1500 is slightly more playful than the 2100. It also has a higher top speed. Details Front wing: The front wing is shaped even more towards the HA High Aspect. It is still a comfortable foil to drive but is fully radical in corners and jumps.Included (complete set): 3K carbon front and rear wing. Aluminium mast, fuselage and top plate (fits 90 foilbox-board each). Titanium screws (no rust, no corrosion). The set comes with bag and wing covers, which also fit while the foil is mounted With side pocket for small parts. Maintenance set. Tungsten carbide Torx spanner to prevent wear and keep the screws in good condition. English and German manual with assembly, maintenance, technology and safety tips.Keypoints: Pro Version full 100% 3K carbonMedium-aspect carbon hydrofoil for wingfoiling. Can also be used for wind, sup and wake foiling.The drive 1500 is a playful and fast wing foilThe 1500 cm2 front wing has lift even in light wind winds. At 12 knots (3-4 Beaufort) it can already reach the top.It increases its speed when the wind gets stronger - the trim remains perfect.The drive offers you enormous potential for further development.Stiffest alloy for mast and hull and 3K impact resistant carbon wings. The screws are made of titanium to prevent corrosion - all screws same size Torx (super easy assembly)Compatible with all wingfoil boards and all boards that have 2 boxes (US boxes).1500 cm2 front wing with 87cm span; rear wing with 42cm spanAvailable in 2 sizes: 2100 cm2/99.5 cm wingspan; and a 1500 cm2/xx cm wingspanMast options: 75/83 cm2100 The 2100 is an all-rounder. Large surface area for very early lift. For light riders from 8 knots (2-3 bft), for heavier riders from 12 knots (3-4 bft). And above all, when the wind gets strong, the foil becomes very fast and remains stable. The name drive comes from the feeling you get when quad biking. In choppy waters or if you make a mistake, the drive remains trimmed like a 4×4 and does not tip downwards. The propulsion is maintained. The fuselage has an additional position to mount the tailwing further back, which increases length stability for heavy riders or when windfoiling. The production in a premium factory guarantees durability. The titanium screws do not corrode, so you can leave your foil mounted for a very long time without the problem of it coming loose later. The set comes with bag and wing covers that also fit while the foil is mounted.For whom?Medium-aspect carbon hydrofoil for wingfoiling. Can also be used for wind, sup and wake foiling.The drive offers you enormous potential for your further development.Specifications: Technical data: 2100 cm2 front wing with 99.5cm wingspan; Rear wing with 51cm spanIncluded (complete set): 3K carbon front and rear wings; aluminium mast, fuselage and top plate (each matching 90 foilbox-board). Titanium screws (no rust, no corrosion). The set comes with bag and wing covers, which also fit while the foil is mounted it side pocket for small parts. Maintenance kit. Torx spanner. English and German manual with assembly, maintenance, technology and safety tips.Keypoints:
pro Version full 100% 3K carbonMedium-aspect carbon hydrofoil for wingfoiling. Can also be used for wind, sup and wake foiling.It increases its speed when the wind gets stronger - the trim remains perfect.Stiffest alloy for mast and hull and 3K impact-resistant carbon wings. The screws are made of titanium to prevent corrosion.Compatible with all wingfoil boards and all boards that have 2 boxes (US boxes).2100 cm2 front wing with 99.5cm span; rear wing with 51cm spanAvailable in 2 sizes: 2100 cm2/99.5 cm wingspan; and a 1500 cm2/xx cm wingspanMast options: 75/83 cm
The FPump foil was developed out of the fascination of 100% natural self-propulsion. Everyone who has ever owned a foil has tried it, but few have mastered the art of shallow water pumping without external power sources. With years of experience (and countless slip-ups in the learning process), we've developed the ultimate combination of wing profile and mast height to save you all that trouble. The FPump foil delivers massive lift that lets you effortlessly pump across the water, ride the smallest waves imaginable, foil on the lightest wind days and look like an all-round hero at your next dock or beach BBQ.Unlimited self-propelled flat water foiling possibilities.It planes at the slowest speed.Requires minimal amounts of energy to pump to maintain flight.Who it's for:The FPump- foil delivers massive amounts of lift to effortlessly pump across the water, ride the smallest waves you can imagine, foil on days with the least wind and look like an all-round hero at your next dock or barbecue on the beach.
The package includes:Quantum 100 wing (1724cm2), 72cm mast, 42cm tail stabiliser, shift fuselage, hardware, shim, neoprene wing covers, custom travel caseSpecifications: Surface Area cm: 1724,
Span mm: 1008,
Chord mm: 211,
Aspect Ratio: 5.89
Realise your record-breaking long-distance ambitions, effortlessly ride long waves downwind on the foil or master the perfect dock launch with our exceptional foil. Experience continuous dynamics with minimal pumping - just pump, pump, pump and pause. Its remarkable glide and lift capabilities make it the ideal choice for larger riders or long distance riders. The high aspect ratio and efficiency are not only suitable for wingfoiling in weak wind conditions, but also ensure a seamless connection with the waves when stand-up paddleboarding. With this foil you can improve your riding skills in no time at all. 🏄♂️✨ #SurfStyle #GoingTheDistanceFor whom?Dock-foilers need look no further. This is your foil.1350 for: Riders > 80kg/distance/downwinders.Ideal for wingfoiling up to 20 knots and sup-foiling in wavesSpecifications:Shaped by Levi, Grafics by GK, 3K full carbon front wingWingspan 1350; Surface area: 1870 cm2; AR: 9.75; Volume: 2423 cm31350 for: Rider > 80 kg/distance/downwinder.Included (complete set): Front & Tailwing, stick, 70 cm fuselage, 75 cm mast, mast plate, screws + Torx tool (1 tool fits all screws), covers/protection that can be fitted while the foil is assembled, bag, manual.Keypoints:Consistent dock starts - and then glides on and on and on.Pause between pump strokes and let it glideWide, but still manoeuvrable3K- carbon- wings; Fuse, mast, mast-plate made of T-9 alloyLess fatigue due to low drag + thin foil and fuse + stiff mast and connections1150 for riders <80 kg/boatrides/tricks.970 for kids/ wingfoiling
The GLIDE surf creates a playground for new surf experiences. With a stable and fast take-off, regardless of the surf conditions, the GLIDE surf delivers superior glide and controlled speed to ride waves as far as they can flow. On the wave, the Glide surf allows you to fly through the sections and transition from straight riding to progressive foil turns. Your imagination is now the only limit to how you use the waves and how far you will fly. Features: Lift and acceleration
Smooth, early lift for easy take-off and touchdown, even at low speeds. Glide and stability Long glide phases and stable flight characteristics. Dihedral front profile
The Glide surf was developed to be able to fly radical turns. The centre aspect ratio of the front wings allows you to continue generating lift even if the foil is radically tilted to one side or the other. You come out of the turns with more speed and lift than when you went in. Smooth edges
Because safety is no coincidence. Our Glide Series wings are among the safest high-performance wings on the market. Suitable for:
Smooth, easy, early take-off. Excellent glide combined with controlled speed. Glide surf is our playful, manoeuvre-oriented profile. Rounded edges ensure a safe foiling experience and a wide angle of attack for increased forgiveness. The Glide surf has a shorter hull to increase manoeuvrability on the wave. Multiple front and rear wing options cover all winds, rider weights and abilities. Specifications:Size: 15
Mast length (cm): 75
Fuselage length (cm): 70
Front wing Span (cm): 86
Front wing Area (cm2): 1490
Aspect Ratio: 5.0
Back wing Span (cm): 38.5
Back wing Span cm2): 220
Aspect Ratio: 6.7
Base: Interchangeable HeadSize: 17
Mast length (cm): 75
Fuselage length (cm): 70
Front wing Span (cm): 96
Front wing Area (cm2): 1650
Aspect Ratio: 5.3
Back wing Span (cm): 42
Back wing Span cm2): 240
Aspect Ratio: 7.4
Base: Interchangeable HeadSize: 19
Mast length (cm): 75
Fuselage length (cm): 70
Front wing Span (cm): 102
Front wing Area (cm2): 1850
Aspect Ratio: 5.6
Back wing Span (cm): 42
Back wing Span cm2): 240
Aspect Ratio: 7.4
Base: Interchangeable HeadSize: 21
Mast length (cm): 75
Fuselage length (cm): 70
Front wing Span (cm): 106
Front wing Area (cm2): 2100
Aspect Ratio: 5.3
Back wing Span (cm): 42
Back wing Span cm2): 240
Aspect Ratio: 7.4
Base: Interchangeable HeadSize: 21
Mast length (cm): 75
Fuselage length (cm): 70
Front wing Span (cm): 105
Front wing Area (cm2): 2270
Aspect Ratio: 4.9
Back wing Span (cm): 42
Back wing Span cm2): 240
Aspect Ratio: 7.4
Base: Interchangeable Head
The Trackster foil is a medium to low aspect ratio carbon fibre front/rear wing, aluminium mast and fuselage that provides the rider with a simple and stable foiling platform. It's quick to get on the foil and when stationary, it planes forever.Specification:
ensis TRACKSTER 1700 Wing size: 2.5 - 5.2 m2 Weight of the rider: 55 - 85 kgWind range: 12 - 28 knotsFront wing area: 1700 cm2
Front wing Wingspan: 85 cm
Rear wing area: 360 cm2
Rear wing Wingspan: 40 cm
Fuselage: 63 cm
Mast: 82 cm ensis TRACKSTER 1900Wing size: 3.5 - 6.2 m2Weight of the rider: 65 - 100 kgWind range: 12 - 20 knotsFront wing area: 1900 cm2
Front wing Wingspan: 90 cm
Rear wing area: 360 cm2
Rear wing Wingspan: 40 cm
Fuselage: 75 cm
Mast: 82 cmSuitable for:
This foil is perfect for freeride winging or pumping.
The 1750foil for lighter people or stronger wind
The 1950 for heavier people or weaker wind
The FWake package is the perfect choice for beginner foilers looking to take their boating experience to new heights. The FWake is part of the Hover Glide foil platform from slingshot, which is built with an aluminium structure and features carbon wings, creating the perfect balance between performance and price. The FWake foil comes with a 61cm mast - the ideal ride height for learning to foil. The FWake package is an excellent ride both with the handle in hand and when it comes to surfing back 1-3 boat waves (depending on wave height), thanks to the Gamma 68cm front wing which offers plenty of stability, power and lift for those just getting into the sport.
The FWake foil is great for learning, trolling with the handle in hand and surfing most boat waves up to 2nd or 3rd roll back!
Package includes:Hover Glide FWake V4 foil, 62 cm (24") Mast, Gamma 68 Front wing, 42cm Rear wing, Neoprene wing Covers, Complete foil Carrying Bag
The FWake foil is the perfect choice for foil beginners who want to take their boating experience to new heights! The FWake is part of slingshot's Hover Glide foil platform, built with an aluminium structure and equipped with carbon wings that create the perfect balance between performance and price. The FWake foil comes with a 61cm mast - the ideal ride height for learning to foil. Specifications: mast cm: 61, fuselage mm: 610, combined pounds: 9.7 (4.4 kg), front wing cm: Gamma 68, rear wing cm: Stabiliser 42, base: PedestalFeatures:
Neoprene wing covers and travel bag. Our hand-picked package for versatility and user-friendly freeride foiling. Great for learning, towing with handle in hand and surfing on most boats up to 2nd or 3rd reel! HoverGlide is a modular system with a variety of add-on wings and components. Suitable for:
The FWake package is great to ride with the handle in hand as well as surfing on the 1st to 3rd boat wave (depending on wave height), thanks to the 68 cm long Gamma front wing, which provides plenty of stability, power and lift for beginners.
The FSurf foil is the perfect choice for experienced foilers looking for the perfect blend of performance, speed and pumpability. The FSurf is part of slingshot's signature Hover Glide foil platform, built with an aluminium structure and equipped with carbon wings that create the perfect balance between performance and price. The FSurf foil is equipped with a 71cm mast which increases the responsiveness of the foil and gives the surfer a longer reach from the foil to the board - ideal for getting more distance out of each 'stroke' as the surfer pumps the foil to manoeuvre between waves or over flat water. The FSurf is equipped with our popular Infinity 76 surf wings which has a large surface area to dissipate smaller amounts of wave energy, carry heavier riders (200 lbs +) with ease and is also the most manoeuvrable and manoeuvrable of the surf wings. The speed range of this foil is also extremely impressive - it is designed to take off early and stay at speeds of around 18 mph. This setup is stable and forgiving enough for beginners and super agile and playful for advanced freeriding as you progress.Specifications: Surface area cm: 1534 Span mm: 765 Chord mm: 262 Aspect ratio: 3.82The package includes:
71cm (28") mast, base, shift fuselage, Infinity 76cm front wing, 42cm rear wing, hardware, washer, neoprene wing covers, travel case
The ensis PACER is for wing foilers with high performance requirements, from explorers to advanced pilots. As a freerider and paraglider addict, you will love the PACER. The optimised profile and the perfectly tuned outline of the front wing offer early and light lift. The foil lifts you gently and you are flying and enjoying the high stability and smooth control that the PACER offers. The front and rear wings are perfectly balanced and thanks to the winglets you fly as if on rails. The excellent gliding characteristics help you glide through your turns. The light lift, high speed, stability and control ensure high performance in all wind conditions. Specification:PACER 1700 Wing sizes: 1.8 - 6.0 m2 Weight of the rider: 45 - 65 kg Wind range: 12 - 45 knots Front wing area: 1400 cm2
Front wing span: 950 mm
Rear wing area: 450 cm2
Rear wing span: 465 mm
Fuselage: 70 cm
Mast: 82 cm carbon High Modulus TPPACER 2000
Wing sizes: 2.5 - 6.9 m2 Weight of the rider: 50 - 100 kg Wind range: 6 - 35 knotsFront wing area: 2000 cm2
Front wing span: 1100 mm
Rear wing area: 450 cm2
Rear wing span: 465 mm
Fuselage: 70 cm
Mast: 82 cm carbon High Modulus TPPACER 2400 Wing sizes: 2.5 - 6.9 m2 Weight of the rider: 75 - 120 kgWind range: 4 - 20 knots Front wing area: 2400 cm2
Front wing span: 1250 mm
Rear wing area: 450 cm2
Rear wing span: 465 mm
Fuselage: 70 cm
Mast: 82 cm carbon High Modulus TPTechnical characteristics: Light and stiff The 82 cm carbon mast is the perfect length for pumping and gliding through the waves. Mounting plate for foil positioning optionsMount the foil in any double us-box and position it according to your weight, riding style and wind conditions. Mounting memory system Found the optimum foil position? The brass nuts can be fastened with the small grub screws in the us-box. Simple and secure fasteningThe M8 stainless steel screws and the supplied Allen key allow easy and firm attachment to the board.Suitable for:
PACER 1700 For light riders and advanced ridersPACER 2000 For explorers to advanced ridersPACER 2400 For light wind and heavier riders
The flight FR is the latest evolution of our affordable high performance freeride foils for real world sailors. It is less intimidating than full carbon foils and still delivers exceptional speed in a wide wind range.
The flight FR is compatible with high performance freeride and specialised foil boards and not only offers great lift, stability and control, but is even faster than many other full carbon foils on the market. Specifications:Size: 80= Mast length (cm): 85
Fuselage length (cm): 80
Front wing span (cm): 70
Front wing area (cm2): 1130
Rear wing span (cm): 38.5
Rear wing area (cm2): 220
Base: Interchangeable headSize: 90= Mast length (cm): 85
Fuselage length (cm): 80
Front wing span (cm): 80
Front wing area (cm2): 1300
Rear wing span (cm): 38.5
Rear wing area (cm2): 220
Base: Interchangeable headFeatures: Lift & acceleration
Smooth, early lift for easy take-off and touchdown, even at low speeds. Speed and stability
race-worthy speed combined with excellent stability and control. Wide wind range 80 and 90 cm front wings cover a wind range from 10 to 35 kntos. Range of use
The flight FR is aimed at high performance freeride foilers, but is also manoeuvrable in the hands of advanced freestyle foilers. The flight FR has the speed and agility you need to improve any foiling session. Suitable for:
Our riders have commented that this is the most fun windsurfing foil in the range and our freestylers have even chosen it over any other foil for freestyle foiling. A real all-round foil for everyone.
The Hover Glide FKite package takes the guesswork out of finding a user-friendly and versatile freeride- foil setup that you can enjoy for years to come. Featuring the bat-like Space Skate 65cm front wing, this setup is stable and forgiving enough for beginner foilers to learn on and is super agile and playful for advanced freeriding as you progress.Specifications:Surface area cm2: 1504
Aspect ratio: 1.43
Span mm: 652
Chord mm: 275
Weight kg: 1.55
Mast height: 28" / 71 cm
Fuselage: 610 mm
Total weight: 11.6 lbs / 5.26 kg
Front wing: Space Skate 65
Rear wing: Stabiliser 42 cm
Base: PedestalWHY YOU WILL LOVE THE HOVER GLIDE FKITENeoprene wing covers and travel bag71cm (28") aluminium mastOur hand-picked package for versatility and user-friendly freeride foilingSpace Skate wing has tons of range, playful feel and self-centring flightGreat for learning and progressing - lots of lift, forgiving responseSuper playful side-to-side handling, feels like powder turns on a snowboardHover Glide is a modular system with a variety of additional wings and componentsPackage includes:
71cm (28") mast, base, Switch Fuselage 610mm, Space Skate 65 front wing, 42cm rear wing, hardware, equaliser disc, neoprene wing covers, travel bagCarbon fibre composite wing construction: Stronger and more efficient.
Shift Fuse: 2 versatile mast mounting options for different performance
2000 cm2 The Flite range with aluminium mast and fuselage focuses on the important discovery and progression phase, where plug-and-play accessibility, lift-off and stability in flight will quickly get you hooked on the thrill of wing foiling.The FLITE 2000 is equipped with a 1500 cm2 front wing, 450 cm2 rear wing and 75 cm mast length as Low Aspect Ratio (5.4) for better control and stability, perfect for beginners and advanced riders.
flight foil was designed and configured with the best materials available. The base, mast and fuselage are made of aluminium and the front and rear wings are made of military grade prepreg carbon fibre.
All front and rear wings, the T-bar and the fuselage are interchangeable, allowing you to fine-tune the equipment to your weight, riding style and conditions. The forged carbon mast base has slotted open ends for quick assembly and disassembly. It is also extremely durable.Specification:Mast length: 75 cm / 29 inchesFuselage length: 87 cm (34 inches)Front wing area: 2000 cm² / 310 in²Tail surface area: 69.75 in² / 450 cm²Features:Low aspect ratio front wing
Better low-end light wind performance, stable, perfect for exploring the sports. Plug-and-Play: One fuselage, one front wing, one mast, one stabiliserFront wing size adapted to the weight of the rider
2000: <80-100 kg +Mast, fuselage, plate, connector
Mast 75 cm - Construction: aluminiumMast, fuselage, plateSuitable for:
Discovery phase & progression
Control at low speed
Turns and jibes with ease
e, connector
Mast 75 cm - Construction: Aluminium
Marine-grade hardware - Torx 8 mm
Strong and corrosion-resistant
Padded carry bag/cover
For maximum protectionSuitable for:Discovery phase & progressionControl at low speedTacking and jibing with ease
Medium aspect ratio for ease of use and manoeuvrability. Moustache rear wing for directional stability and ease of use. Versatile performance and control at high speeds.For riders looking for the perfect balance between performance, ease of use and ultimate manoeuvrability, the Tracer hydrofoil series offers the ability to ride the cleanest lines with intuitive ease.Features:MEDIUM ASPECT RATIOThe Tracer range features a medium aspect ratio for ease of use, manoeuvrability and versatile performance. 71CM STEALTH HULL The longer effective cadence of the 71cm hull provides a more stable platform for general freeride use and progression. The unique stealth fuselage minimises drag while maximising stiffness, while the fluid dynamics minimise the vibrations that occur with a round fuselage, resulting in increased stability. TRIMMABLE REAR WINGThe rear wing allows quick adjustment of the trim angle to compensate for lift requirements for different rider levels, personal preferences and when using different wing configurations.
foil User guide kite wake / Tow surf / pump pump wing supBeg. - Int.Beg. - Int.Beg. - Int.Beg. - Int.Beg. - Int.Beg. - Int.Tracer v2 85050 - 90kg50 - 90kgN/AN/A50 - 85kgN/ATracer v2 100065 - 100kg65 - 100kg50 - 70kg50 - 70kg55 - 90kgN/ATracer v2 130070kg +70kg +60 - 85kg60 - 80kg60 - 95kgN/ATracer v2 160080kg +80kg +75 - 90kg75 - 90kg65 - 100kg60 - 80kgTracer v2 1900N/AN/A90kg +90kg +75 - 110kg80 - 100kg
The FCARVE foil is our most powerful and well-rounded package in the entire Hover Glide line. It is the perfect blend of low-speed lift, high-speed efficiency, overall manoeuvrability and pump capability. With the trend moving more and more towards high-aspect performance, the Quantum 85 wing offers all the benefits without sacrificing the low-speed lift and manoeuvrability that make slingshot foils so user-friendly and easy to ride. This foil is perfect for riders who already know how to foil and want to maximise their foil performance on the Hover Glide foil platform.Specifications:
Surface Area cm: 1476, Span mm: 856, Chord mm: 211, Aspect Ratio: 4.96
The package includes:72cm (28") mast, Quantum 85cm front wing, 42cm rear wing, hardware, washers, neoprene covers for the wings, travel case.
Medium aspect ratio for ease of use and manoeuvrability.
Mustache rear wing for directional stability and ease of use.
Versatile performance and control at high speeds.For riders looking for the perfect balance of performance, ease of use and ultimate manoeuvrability, the Tracer hydrofoil series offers the ability to ride the cleanest lines with intuitive ease. Features:
MEDIUM EXTENSION RATIO
The Tracer series features a medium aspect ratio for ease of use, manoeuvrability and versatile performance. 71CM STEALTH HULL The 71cm hull's longer effective cadence provides a more stable platform for general freeride useand progression.
The unique Stealth hull minimises drag while maximising stiffness, while the fluid dynamics minimise the oscillations that occur with a round hull, resulting in increased stability. TRIMMABLE REAR WING
The rear wing allows quick adjustment of the trim angle to compensate for lift requirements for different rider levels, personal preferences and when using different wing configurations.
The 76 cm long Infinity wing ensures a very early lift-off and makes getting up with just a few pumps a breeze. Reach 7-8 mph board speed and you're up and cruising. The extremely low stall speed allows you to ride swell and waves and makes foiling gybes effortless. The Infinity 76 is a self-stabilising wing with downforce in the wingtips that kicks in at medium to high speeds and prevents the wing from over-lifting, allowing you to recover more weight and reach speeds of over 25 knots. A real game changer! The long 91 cm aluminium mast allows for a wide flight envelope and gives you time to correct your mistakes before you hit or stall. With the Switch Fuse you can move the front wing forwards or backwards in 3 positions to put the lift exactly where you want it, no matter which board you are riding. The modular system of the Hover Glide allows you to change wing, mast and fuselage lengths to achieve a customised ride or to use it on your kite, wake, sup or surfboard.Specifications:
Surface area cm: 1534
Wingspan mm: 765
Chord mm: 262
Aspect ratio: 3.82Who is it for?The Hover Glide is the choice for manoeuvre-oriented gliders and forgiving enough for anyone who wants to take their first flight.
The package includes:92cm (35") mast, lightweight base, tuttle adapter, switch fuselage, Infinity 76cm front wing, 42cm rear wing, fittings, washers, neoprene covers for the wings, special travel case.
The ensis INFINITY wing foil has been developed for ambitious explorers through to experts who are looking for maximum performance on freeride, freestyle and wave. The INFINITY is easy to control and offers outstanding manoeuvrability and agility. It has a unique performance spectrum and offers a high maximum speed combined with amazing low-end lift. Two of the impressive features of this foil are the control you have when carving tight turns and the pop it achieves on take-off. The INFINITY wing foil is the perfect blend of playfulness and control to push your limits. It's time to dance and play on the water! Specification:
INFINITY 1100 Wing sizes: 1.8 - 5.2 m2 Rider weight: 45 - 80 kg Wind range: 12 - 45 knotsFront wing area: 1100 cm2
Front wing span: 800 mm
Front wing profile: 19 mm
Rear wing area: 265 cm2
Rear wing span: 425 mm
Fuselage: 70 cm
Mast: 82 cm carbon High Modulus TPINFINITY 1400 Wing sizes: 2.5 - 6.2 m2 Weight of the rider: 50 - 100 kg Wind range: 10 - 30 knots
Front wing area: 1400 cm2
Front wing span: 900 mm
Front wing profile: 20 mm
Rear wing area: 265 cm2
Rear wing span: 425 mm
Fuselage: 70 cm
Mast: 82 cm carbon High Modulus TPINFINITY 1800 Wing sizes: 2.5 - 6.9 m2 Weight of the rider: 75 - 115 kg Wind range: 8 - 20 knots Front wing area: 1800 cm2
Front wing span: 1000 mm
Front wing profile: 22 mm
Rear wing area: 265 cm2
Rear wing span: 425 mm
Fuselage: 70 cm
Mast: 82 cm carbon High Modulus TPFeatures: For ambitious explorers to expertsUnlimited carving Ultra popPlaning and spray Speed and tight turns in the wave Wide wind rangeTechnical features: Light and stiff The 82 cm carbon mast is the perfect length for pumping and planing through the waves.Mounting plate for foil positioning options Mount the foil in any double us-box and position it according to your weight, riding style and wind conditions. Mounting memory system Found the optimum foil position? The brass nuts can be fastened with the small grub screws in the us-box.Simple and secure fastening The M8 stainless steel screws and the Elan spanner supplied enable simple and secure attachment to the board. Suitable for: INFINITY 1100 Max. Power for lighter ridersINFINITY 1400 Max. High wind power for heavier ridersINFINITY 1800 Max. Light wind performance for light to medium riders
Medium aspect ratio for ease of use and manoeuvrability. Mustache tail wing for directional stability and ease of use. Versatile performance and control at high speeds.For riders looking for the perfect balance of performance, ease of use and ultimate manoeuvrability, the Tracer hydrofoil series offers the ability to ride the cleanest lines with intuitive ease. Features:MEDIUM ASPECT RATIOThe Tracer series features a medium aspect ratio for ease of use, manoeuvrability and versatile performance. 71CM STEALTH HULL The longer effective cadence of the 71cm hull provides a more stable platform for general freeride use and progression. The unique stealth fuselage minimises drag while maximising stiffness, while the fluid dynamics minimise the oscillations that occur with a round fuselage, resulting in increased stability. TRIMMABLE REAR WINGThe rear wing allows quick adjustment of the trim angle to compensate for lift requirements for different rider levels, personal preferences and when using different wing configurations.
The ensis FLOW with medium aspect ratio is for all athletes who are looking for a versatile high-performance foil. The delta shape of the front wing enables incredibly early flying and combines all the relevant characteristics for use in windsurfing, wing, surf and sup foiling in a wide wind range. Thanks to the 90 cm long hull, the foil is ultra-stable and at the same time offers great manoeuvrability, which is appreciated by explorers and experts alike. For experts, the foil guarantees a great pop for high jumps and safe landings. High quality, made in Europe. Specification: front wing: 1500 cm2,
rear wing: 450 mm,
fuselage: 90 cm,
mast: 82 cm carbon High Modulus TPPerformance of the windsurfing foil Sail: 4.4 - 6.2 m2Wind range: 5 - 25 knots wing, surf, sup foil Performance Wing sizes: 2.5 - 5.2 m2 Wind range: 5 - 25 knots Characteristics:
Smooth and early lift in 4 sportsThe delta shape of the front wing ensures an early and smooth take-off and combines all the relevant characteristics for use in windsurfing, wing, surf and sup foiling.Stability and control The optimised length of the fuselage provides stability and control. The front and rear wings are ideally balanced and thanks to the winglets you fly as if on rails.Extremely manoeuvrable The 90 cm long aluminium fuselage ensures great manoeuvrability and yet high stability. The stiff carbon mast ensures direct power transmission to further improve manoeuvrability. Technical features:
Light and stiff The 82 cm carbon mast is the perfect length for pumping and gliding through the waves.Mounting plate for foil positioning options Mount the foil in any double us-box and position it according to weight, riding style and wind conditions. Mounting memory system Found the optimum foil position? The brass nuts can be fixed with the small grub screws in the us-box. Simple and secure fastening The M8 stainless steel screws and the supplied Allen key allow easy and firm attachment to the board.Suitable for:Windsurf foil PerformanceThe ensis FLOW is designed for foil- freeride beginners through to foil- freestyle experts. Wing, surf, sup foil PerformanceThe ensis FLOW is ideal for each of these 3 sports. The 90 cm long hull ensures early and gentle buoyancy.
The AK Plasma foil series has been developed in collaboration with top athletes such as Zane Schweitzer, the ultimate Waterman, to offer an extremely powerful board without compromise, with which you can chase the fastest waves on the ocean or pump with infinite glide. Features
The 61 cm hull offers high manoeuvrability and more efficient pumping with a shorter cadence compared to the 71cm hull. The unique stealth hull minimises drag while maximising stiffness, while the fluid dynamics minimise the oscillations of a round hull, resulting in increased stability. The trimmable rear wing allows quick adjustment of the trim angle to compensate for lift requirements for different rider levels, personal preferences and when using different wing configurations. Suitable for:
The high aspect ratio Plasma series from carbon is perfect for pump, glide and higher speeds. Angled tail wing for efficiency and pivoting turns. Short fuselage for manoeuvrability and pumping.
MORE WINDSURFING
That's what foiling means. For most windsurfers, foiling has the potential to DOUBLE their time on the water.
Our foil equipment has been designed to get people up and flying easily, safely and with as much fun as possible. By directly understanding all the variables ourselves, we have made the design choices to deliver a foiling experience that will expand your windsurfing world.
FLY HIGH.
SIMPLE SETUP
Rigging up has never been the most fun part of windsurfing. Adding a foil can increase the complexity, so we have focused on making it as easy as possible.
/ Minimal bolts mean less to install.
/ Only 2 different bolt types -- short bolts for the wings, and long ones for the mast.
/ A single tool required. The 5mm Hex Key was selected for it's long-term reliability, the abundance of compatible tools (many sails use this size for batten tension), and easy replacement of bolts.
/ Plug in connections between fuselage/mast and fuselage/front wing.
RIGIDITY
If you're flying half a metre out of the water, you don't want that front wing moving around underneath you. Rigidity is the key to holding the wings in a consistent position. Rigidity allows you to lock in and windsurf on the foil, rather than riding a bucking bronco.
/ Mast geometry maximizes stiffness. 19mm thick x 145mm wide. Much stiffer both longitudinally and torsionally than most carbon masts.
/ Spigot on fuselage locks into the mast section.
/ Fuselage uses straight sections for directional stability, and to maximize the strength/weight ratios.
/ 4x connection surfaces on the front wing connection reduces any movement.
PERFORMANCE
Easy enough for your first flights, the RedWing is fun enough to keep you foiling into gybes, 360's and beyond. Cruise speed is set at 20knots for freeride foil performance.
/ 1400cm/2 front wing has enough area to handle low speed maneuvers whilst still being fast enough for fun./ The low-aspect front wing is 76cm wide, making it suited to narrower freeride foil boards 65-85cm.
/ A longer 95cm fuselage increases pitch stability and enables less concentration on foil trim..
SAFETY
Foiling is more fun when you're not bleeding. So we considered every component and how it's user friendliness could be improved.
/ All wingtips have rounded tips and are curved down, away from kicking feet.
/ Wing covers are designed to stay on during setup, minimizing accidents while on land.
/ 90cm mast gives enough height for correct technique, minimizing both touchdowns and breaches. / Rigid aluminium hardware delivers consistent, reliable lift which increases control.
GEOMETRY
SPAN
An increased distance between front wing and back wing promotes stability, improves light wind efficiency and smoothes the ride.
HEIGHT
900mm mast reduces both touchdowns and breaches. It allows enough height to clear chop and ride with confidence.
WIDTH
The 1400 wing is 760mm wide so it does not
require a super wide board to control the leverage. Suits boards in the 650mm -- 850mm range.
Gentle, light, early take-off. Excellent glide combined with controlled speed. Glide surf is our playful cruising and manoeuvring foil. Rounded edges ensure a safe foiling experience and a wide angle of attack for more forgiveness. The Glide surf has a shorter hull to increase manoeuvrability on the wave. Multiple front and rear wing options cover all winds, rider weights and abilities. Features:
Lift and acceleration
Smooth, early lift for easy take-off and touchdown, even at low speeds. Glide and stability
Long glide phases and stable flight characteristics. Dihedral front profile
The Glide surf was developed to be able to fly radical turns. The medium aspect ratio of the front wings allows you to continue to generate lift even if the foil is radically tilted to one side or the other. You come out of the turns with more speed and lift than when you went in. Smooth edges
Because safety is no coincidence. Our Glide Series wings are among the safest high-performance wings on the market. Suitable for:
GLIDE wind is our friendly, easy to ride and carve foil, which is also suitable for wave riding and simple freestyle moves. Have you always dreamed of foiling but thought it might be too dangerous or difficult? GLIDE wind is the perfect tool to start foiling.Specifications:Size: 11
Mast length (cm): 85
Fuselage length (cm): 80
Front wing span (cm): 70
Front wing area (cm2): 1130
Aspect ratio: 4.3
Rear wing spin (cm): 38.5
Rear wing area (cm2): 220
Aspect ratio: 6.7
Base: Interchangeable headSize: 13
Mast length (cm): 85
Fuselage length (cm): 80
Front wing span (cm): 80
Front wing area (cm2): 1300
Aspect ratio: 4.9
Rear wing tip (cm): 38.5
Rear wing area (cm2): 220
Aspect ratio: 6.7
Base: Interchangeable headSize: 15
Mast length (cm): 85
Fuselage length (cm): 80
Front wing span (cm): 86
Front wing area (cm2): 1490
Aspect ratio: 5.0
Rear wing tip (cm): 38.5
Rear wing area (cm2): 220
Aspect ratio: 6.7
Base: Interchangeable headSize: 17
Mast length (cm): 85
Fuselage length (cm): 80
Front wing span (cm): 95
Front wing area (cm2): 1650
Aspect ratio: 5.3
Rear wing tip (cm): 42
Rear wing area (cm2): 240
Aspect ratio: 7.4
Base: Interchangeable headSPAN: Length of the wing, measured from end to end.
SURFACE: Projected area of the wing on a flat plane.
CHORD: (Maximum chord) - Width of the wing, measured at the centre.
SIDE RATIO: Wingspan squared divided by the surface area.
REAR WING: Projected area of the rear wing on a flat plane.
1500 cm2The Flite range with aluminium mast and fuselage focuses on the important discovery and progression phase, where plug-and-play accessibility, lift-off and stability in flight will quickly get you hooked on the thrill of wing foiling.The FLITE 2000 is equipped with a 1500 cm2 front wing, 450 cm2 rear wing and 75 cm mast length as Low Aspect Ratio (5.4) for better control and stability, perfect for beginners and advanced pilots.
flight foil has been designed and configured with the best materials available. The base, mast and fuselage are made of aluminium and the front and rear wings are made of military grade prepreg carbon fibre.All front and rear wings, the T-bar and the fuselage are interchangeable and allow you to fine-tune the equipment to your weight, riding style and conditions. The forged carbon mast base has slotted open ends for quick assembly and disassembly. It is also extremely durable.Specification:Mast length: 75 cm / 29 inches Fuselage length: 85 cm (33 inches) Front wing area: 1500 cm² (232.5 in²) Tail surface area: 69.75 in² / 450 cm²Features:Low Aspect Ratio Front wing Better low-end light wind performance, stable, perfect for discovering the sports. Plug-and-Play: One hull, one front wingwing, one mast, one stabiliserFront wing sizes adapted to the weight of the rider 2000: <80-100 kg +Mast, fuselage, plate, connector Mast 75 cm - Construction: AluminiumFront wing & stabiliser construction: Carbon sheathing.MARINE-GRADE HARDWARE - TORX 8 MM Strong and corrosion resistantPADDED CARRY BAG/COVERS For maximum protectionSuitable for:Discovery phase & progressionControl at low speedTurning and jibing with ease