M8Length: 25 mm4 nuts and bolts in one packFor attaching the foil to the board
This set contains all the necessary replacement screws and tools for the Indiana Monobloc Foil System. Mast:4 x M8 30 mm TX45 Stainless Steel A2 screw2 x M8 60 mm TX45 Stainless Steel A2 screw 4 x Lio-Tec T-slot Tail / Stabiliser:2 x M6 20 mm TX30 Stainless Steel A2 screw1 x M6 30 mm TX30 Stainless Steel A2 screw Tools:1 x L-Tool TX451 x L-Tool TX30
A4 Hardware kit to connect fuselages to mastwithout washer, 2 pieces
Lockable T-Nuts (brass) packed in packs of 4 inlcuding M8x30mm button head stainless bolt and stainless grub screw. recommended key:
Screws to connect stabilisers to fuselage. Torx 30
Screws to connect stabilisers to fuselage. Torx 30 Stabiliser: 215 (S399)
Screws to connect stabilisers to fuselage. Torx 30
ENSIS footstrap screw set metric M5x30 A4/316 steinless steel Cylinder Head /Torx T30 with washer easy for multiple mounting with the ENSIS Tool
ENSIS footstrap screw set standard plugs M5x30Torx T30
Stainless steel M8 Torx screws are used to securely connect the aluminium baseplate to the tracks of the board. Includes 4 x stainless steel M8 Torx screws 30 mm.
1700: 6xM6x30 + 2xM6x19 + 2xM6x25 1900: 7xM6x30 + 4xM6x25
2 x 25mm M6 (Torx 30) screws + TX30 L-Tool
The Seek Air is supplied with screws suitable for use with the Free-Foil straps, Free-V-Foil straps and Free-Lo straps. This replacement screw pack contains 5x M6x18mm screws with hexagon socket for Free straps and 5x M6x16mm screws with hexagon socket for Free-Lo straps.
Set of 5 screws for attaching Free Surf, Free Foil, Free V, Free Lo or Free Lo V straps to your board. The screws ensure secure and reliable mounting of the straps and are ideal as a replacement or for additional set-ups.Compatible with Cross, Charge and all foil boards except Sense and Seek Air. The scope of delivery includes 5 screws measuring 6.3 x 25 mm.
With these lightweight Titanium Thumb Screws from North Kiteboarding, you can reposition the mast of your foil board directly on the water without the need for tools. Designed for quick installation and easy adjustment, the screws allow you to move the mast forwards or backwards in the DropBox track by loosening and retightening them by hand.The 30 mm Thumb Screws are compatible with Seek, Swell, Scoop, Horizon and Vert Foilboards as well as all boards that use M8x30 mm screws. They are not suitable for Sense, Seek Air with M8x23 mm or Scoop Mini with M8x25 mm. Thanks to their low weight and tool-free handling, they are ideal for riders looking for maximum flexibility on the water.The screws may only be tightened by hand. No tools may be used and the screws must not be overtightened. Due to the lower torque, the screws can come loose more easily and they may not be exactly aligned with the mast. Therefore, check regularly before and during each session that all screws are tight.
This compact Torx T40 screwdriver with lanyard from North Kiteboarding is ideal for quick adjustments to foils or handles on the go. Thanks to its handy size, the tool is easy to carry in your pocket or on your key ring and is always ready for use.The Mini T40 screwdriver is compatible with Sonar foils and the ShiftLock Modular Track System and enables quick retightening or conversion on land. Adjustments to the foil setup in the water can lead to the loss of screws or material and should be carried out with appropriate caution. Due to its compact design, the tool has a reduced torque, which is why regular checking of the screw fit before and during each session is recommended.After each use, the tool should be rinsed with fresh water and dried completely before being stored away to ensure a long service life.
