🪶 Stardupp Navigator 2100 Foil - Stable. Fast. Full lift. Fly earlier. More control. For all skill levels. The Stardupp Navigator 2100 is a high-quality carbon foil for wingfoilers who want to take off early, learn safely and develop their skills in the long term. With a large 2100 cm² front wing, a medium-length 80 cm mast and a stable 70 cm fuselage, this foil offers a perfect balance between lift, control and speed - ideal for beginners as well as advanced riders on light wind days. Tip: Thanks to its large, flat surface, this foil is also ideal for learning pump foiling - a versatile training tool! ✅ Your advantages at a glance Large surface = early lift - ideal when there is little wind and for learning wingfoiling Also suitable for learning pump foiling - thanks to flat, efficient wing geometry High-end carbon - stiff, light, robust 80 cm mast & 70 cm fuselage - balanced setup for stability & manoeuvrability Perfect for beginners & light wind Modular system - interchangeable wings & components Transport bag included 📦 Technical data Front wing: 2100 cm², medium aspect ratio, flat geometry, carbon fibre Stabiliser: 490 mm span, carbon Mast length: 80 cm (aluminium) Fuselage: 70 cm length Connection system: Modular, screwed Range of use: Wingfoiling beginners & light wind, suitable for pump foiling beginners Target group: Beginners, intermediates Scope of delivery: Front wing, stabiliser, mast, fuselage, screw set, transport bag 🏁 Conclusion The Stardupp Navigator 2100 Foil gets you up in the air early, safely through wingfoil manoeuvres and reliably in light winds. The large, flat front wing area also makes it ideal for your first steps in pump foiling - a foil for anyone who wants to train flexibly and constantly improve.
For all levels:The Pumpster 95 board combined with the Navigator 2100 Foil offers you the perfect set for pump foiling - whether you're a beginner or a pro! With its compact shape and excellent buoyancy, this set ensures fantastic performance and rapid progress.Pumpster 95 board: Compact, lightweight and forgiving - ideal for learning dock starts and advanced pump foiling2100 Foil: Large front wing for early lift during dock starts and stability with every pumpFast propulsion: The set maximises your pumping performance so you spend more time on the water instead of in it 🌊Who is it for?Pump boilers from 40 kg to 110 kg: The perfect set to learn dock starts and improve your pumping skillsFor beginners to pros: The combination of Pumpster 95 and 2100 is suitable for both beginners and experienced riders looking for speed and stabilityAre you looking for a foil that is suitable for both pump foiling and wing foiling? The 2100 foil is the perfect solution: efficient for pump foiling: Thanks to its large surface area and excellent gliding properties, it enables long pumping sessions. Top performance when wingfoiling: From 8 knots (approx. 2-3 Bft.) you are quickly in flight mode. Even in stronger winds, the foil remains stable and easy to control. Beginner-friendly & versatile: Particularly suitable for anyone looking for a setup for multiple disciplines - without compromising on performance.Why this set?Perfect combination: The Pumpster 95 board provides the ideal platform for the 2100 Foil, with minimal drag and optimum liftForgiving: Both products offer maximum stability, even in the event of mistakes or choppy waterCompatibility: The foil is compatible with all US boxes, giving you even more flexibility in your choice of boardDurability: Titanium screws and carbon wings ensure a long service life of the setTechnical data:Pumpster 95 board:Dimensions: 95x43x3.5 cm (3'11 "x17 "x1'3")Volume: 11 litresWeight: Only 2.7 kg - ultra-light for maximum responsivenessMaterial: 100% carbon for minimum drag and maximum performanceCompatibility: Works with all foil systems (90 mm bolt pattern)2100 Foil:Front wing: 2100 cm² with 99.5 cm wingspanRear wing: 51 cm spanMast options: 80 cmMaterial: 100% 3K carbon for front and rear wing, aluminium mast and fuselageCompatibility: Suitable for all boards with US boxesIncluded in the set:Pumpster 95 board3K carbon front and rear wingAluminium mast, fuselage and top plate (compatible with US box boards)Screws (stainless)Bag and wing covers that can also be used while the foil is mounted 🛍️Side pocket for small partsMaintenance kitTorx spannerEnglish and German manual with assembly, maintenance, technical and safety tipsThis pump foil set is everything you need for your best sessions on the water! 🏄♂️🌊Wingfoiling The 2100 foil offers outstanding performance from 8 knots (approx. 2-3 bft) - but remains fast enough even in stronger winds. Fast lift-off: The foil "pops" out of the water quickly. Very stable when wingfoiling: This makes learning and getting started noticeably easier.
The perfect foil for ambitious beginners and advanced riders. Ride is our mid-aspect ratio series designed primarily for wingfoiling. The wings work in a wide range of conditions, from flat water to waves and guarantee fun for beginners and experts. The design is very user-friendly with an early takeoff and low stall speed. The behaviour is very comfortable and controllable. The Ride front wings are very fast and have excellent all-round characteristics with just the right amount of agility and stability. When carving, the wings have outstanding tip break recovery, which means that the tips can break through the water surface without drawing air and producing an unpleasant stall. The 85 cm Charger aluminium mast is the perfect length for beginners who have just learnt to fly. The long 710 aluminium fuselage and the Ride XL stabiliser also ensure solid stability and smooth flying. Care of the aluminium parts: Simply rinse the connections and screws with fresh water after each use. If the foil is not used for a longer period of time, it is best to disassemble it completely.Regularly check the anodes in the aluminium base plate and in the adapter. They degrade after a while, this is normal. This happens more quickly when the foil is used in salt water. The anodes should be replaced if they are broken or cracked. Before reassembling, be sure to coat all screws with a thin layer of Tef-Gel. This helps to prevent them from rusting or seizing!
MANIAC PACER Frontwing MANIAC Alu fuselage 670 MANIAC Rod MANAIC Alu Mast 82
The Sonar Prime Edition from North was developed to make it easier to start foiling and to shorten the learning curve. It is the ideal starter kit for all foil disciplines and is fully compatible with all North Foil products.The kit contains:Prime Mid Aspect Front Wing (MA1200v2 to MA2400v2)Freeride/0 Series StabiliserA700 hullAluminium AF80 mastAF Board AdapterThe E-glass front wings offer the same performance, durability and impact resistance as the carbon versions, but at a lower price. The Prime Edition comes in a spacious, padded bag with room for all components, screws, tools and marine grease. All Sonar Foil systems are compatible with foil boards with a standard 165x90mm mast track.
For all levels:The Pumpster 95 is perfect for beginners to professionals. With its compact and lightweight design, it ensures a responsive ride and is ideal for dock launch pumpers. Less swing weight, minimal drag and a forgiving design make it the first choice for all foilers!For whom?Riders from 40 to 105 kgBeginners, advanced and professionals95 cm: The perfect length for beginners and advanced ridersWhy this foil?Reactive riding: Thanks to its compact and lightweight shape.Easy dock launch: Minimised swing weight and drag.Forgiving: Clean hull shape with progressive rocker for smooth landings.Comfortable: Corduroy EVA deck pad for better foot movement.Universal: Compatible with all foil systems (90 mm bolt pattern).Versatile: Also fits perfectly as a kitefoil board. 🪁Technical data:Dimensions: 3'11 "x17 "x1'3" (95x43x3.5 cm)Volume: 11 litres | Weight: Only 2.7 kg - ultra-light!Carbon sandwich constructionEVA Corduroy deck padMoulded by MILK, graphics by GKMade in the F-ONE factoryIncluded in the set:BoardscrewsSecure packaging for transportWith the Pumpster 95, you get a precisely balanced mix of lightness, stability and performance - for your best sessions on the water! 🌊
The Puddle Pumper V2 was specially developed to make it easier for foilers to get started in the art of pumping from the dock (dock start). The first attempts at pumping are particularly demanding and can put a lot of strain on the material - but this is exactly where the Puddle Pumper V2 comes into its own.This board is designed from the ground up to give you the best possible chance of success when foil pumping without jeopardising your equipment. Every component, every contour and every detail has been optimised to help you learn faster, pump more efficiently and foil longer.Why the Puddle Pumper V2?Developed for dockstart & pumping trainingRobust construction for high loadsOptimised shape for maximum stability and energy transferPerfect for beginners AND ambitious foilersNoticeably increases your pumping success rateThe Puddle Pumper V2 is not just a board - it is your reliable partner on the way to powerful, controlled and long pumping sessions.
ENSIS HIP HOP BackpackPump foil backpackPack smart, ride easy - the backpack for your pump foil adventureThe specially designed ENSIS HIP HOP Backpack protects your valuable pump foiling equipment with well-thought-out compartments and durable materials. Whether on foot, by bike, or in the car, the HIP HOP Backpack gets you and your gear to your spot conveniently, comfortably, and stylishly.Scope of delivery: Backpack only
M8 Torx 40 stainless steel screws with brass sliding blocks are used to connect the aluminium baseplate firmly and stably to the tracks of the board.
Reliably protect your foil board from dents, scratches and abrasion in high-wear areas with this robust TPU protective tape from North Kiteboarding. The durable tape has been specially developed to effectively protect contact points with leashes, harnesses or other equipment.Thanks to the self-adhesive backing, the TPU tape is easy and clean to install and adapts perfectly to the shape of the board. If the nose tape is applied up to the curve of the board tip, it also protects your board when rigging on hard surfaces. A well thought-out solution for long-lasting protection without additional weight.
Screws to connect front wing to fuselage. Torx 40 INFINITY: 880 / INFINITY 1100 PACER: 2000 / 2400
The Stabiliser 550 has been developed for maximum stability and pumping performance. The winglets ensure maximum yaw and roll resistance. The optimised profile distribution and outline curve prevent ventilation. Supplied with high quality protective cover. To create a complete foil, you need to follow these seven steps: Step 1: Choose one of six front wings Step 2: Choose one of three stabilisers Step 3: Choose one of two Fuselages Step 4: Choose the Set of Angle Adaptors Step 5: Choose one of three mast lengths Step 6: If you have a board with two US Fin Boxes/Tracks, choose a Baseplate. If you have a Deep Tuttle/Tuttle Box, choose a Deep Tuttle/Tuttle Adaptor Head AND the Tuttle Adaptor Plate. Step 7: Select the Set of Mast / Fuselage Screws Step 8: Supply yourself with TefGel All foil parts can be combined with each other!
The Stabiliser 420 is suitable for higher foil speeds. Kitesurfers have fun with it, but dock launch foilers can also fly over the water with little energy expenditure. Supplied with a high-quality protective cover. To create a complete foil, you need to follow these seven steps: Step 1: Choose one of six front wings Step 2: Choose one of three stabilisers Step 3: Choose one of two Fuselages Step 4: Choose the Set of Angle Adaptors Step 5: Choose one of three mast lengths Step 6: If you have a board with two US Fin Boxes/Tracks, choose a Baseplate. If you have a Deep Tuttle/Tuttle Box, choose a Deep Tuttle/Tuttle Adaptor Head AND the Tuttle Adaptor Plate. Step 7: Select the Set of Mast / Fuselage Screws Step 8: Supply yourself with TefGel All foil parts can be combined with each other!
Kite and windfoilers are well on their way with the 90 cm aluminium mast. The Indiana mast profile ensures enormous flex and torsional rigidity. The aluminium masts therefore transfer the steering impulses very quickly and directly from the board to the foil. Length: 90 cm, Weight 2.0 kg * Material: T6 6061 Aluminium * Production Technique: Extrusion, Anodising Care of the aluminium parts: Simply rinse the joints and screws with fresh water after each use. If the foil is not used for a longer period of time, it is best to disassemble it completely.Regularly check the anodes in the aluminium base plate and in the adapter. They degrade after a while, this is normal. This happens more quickly when the foil is used in salt water. The anodes should be replaced if they are broken or cracked. Before reassembling, be sure to coat all screws with a thin layer of Tef-Gel. This helps to prevent them from rusting or seizing!
The Indiana aluminium baseplate is milled from hardened T6 6061 aluminium and is therefore very stable and rigid. Thanks to the slots, it weighs just 540 grams. The integrated zinc sacrificial anode prevents the aluminium from oxidising. The open ends of the plates allow the foil to be quickly mounted/removed from the board without having to completely loosen the screws. The screw spacing corresponds to the standard of 9cm. Material: T6 6061 Aluminium * Weight: 540g * Production Technique: CNC, Anodizing Care of the aluminium parts: Simply rinse the joints and screws with fresh water after each use. If the foil is not used for a longer period of time, it is best to disassemble it completely.Regularly check the anodes in the aluminium base plate and in the adapter. They degrade after a while, this is normal. This happens more quickly when the foil is used in salt water. The anodes should be replaced if they are broken or cracked. Before reassembling, be sure to coat all screws with a thin layer of Tef-Gel. This helps to prevent them from rusting or seizing!
The Windsurf Fuselage 750, milled from hardened T6 6061 aluminium, has secure grooves to hold the front wings precisely and stably on four sides. It is tapered towards the rear to save weight. The recessed and bolted aluminium cartridge ensures a rigid and direct connection to the mast. The screwed-on sacrificial anode made of zinc prevents the aluminium from oxidising. The four holes in the fuselage allow the stabiliser to be positioned in three different ways. The three different angle adapters fix the angle of attack of the stabiliser at 1, 2 or 3 degrees. This allows the stability and manoeuvrability of the foil to be changed to suit your taste. The windsurf fuselage can accommodate all Indiana front wings and stabilisers. Care of the aluminium parts: Simply rinse the connections and screws with fresh water after each use. If the foil is not used for a longer period of time, it is best to disassemble it completely.Regularly check the anodes in the aluminium base plate and in the adapter. They degrade after a while, this is normal. This happens more quickly when the foil is used in salt water. The anodes should be replaced if they are broken or cracked. Before reassembling, be sure to coat all screws with a thin layer of Tef-Gel. This helps to prevent them from rusting or seizing!
