The refined aluminium foil mast profile offers the best balance between low weight and increased strength for higher loads. The AF72 mast is ideal for shallower waters and prone surf foiling. The AF85 offers more ride height for crossing waves or heeling for tighter turns. The 55cm AF mast is suitable for extremely shallow locations. Note:The AF mast does not have an integrated foilboard mounting plate. To mount it to the foilboard, you need the AF board adapter, which is available separately or included with all Sonar AF and Prime editions.
Kite and windfoilers are well on their way with the 90 cm aluminium mast. The Indiana mast profile ensures enormous flex and torsional rigidity. The aluminium masts therefore transfer the steering impulses very quickly and directly from the board to the foil. Length: 90 cm, Weight 2.0 kg * Material: T6 6061 Aluminium * Production Technique: Extrusion, Anodising Care of the aluminium parts: Simply rinse the joints and screws with fresh water after each use. If the foil is not used for a longer period of time, it is best to disassemble it completely.Regularly check the anodes in the aluminium base plate and in the adapter. They degrade after a while, this is normal. This happens more quickly when the foil is used in salt water. The anodes should be replaced if they are broken or cracked. Before reassembling, be sure to coat all screws with a thin layer of Tef-Gel. This helps to prevent them from rusting or seizing!
The mast length of 75 cm is ideal for SUP, surf, wake and wing foiling. The Indiana mast profile ensures enormous flex and torsional rigidity. The aluminium masts therefore transfer the steering impulses very quickly and directly from the board to the foil. Care of the aluminium parts: Simply rinse the connections and screws with fresh water after each use. If the foil is not used for a longer period of time, it is best to disassemble it completely.Regularly check the anodes in the aluminium base plate and in the adapter. They degrade after a while, this is normal. This happens more quickly when the foil is used in salt water. The anodes should be replaced if they are broken or cracked. Before reassembling, be sure to coat all screws with a thin layer of Tef-Gel. This helps to prevent them from rusting or seizing!
Screws for Alu Masts and Alu Adaptors 2 x M8 70 mm 2 x M8 40 mm 1 x L-Tool T45
The Indiana Drive Mast offers a revolutionary innovation in the world of foiling, setting new standards in terms of performance and control. Designed to take the foiling experience to a higher level, the Drive Mast promises a unique connection between the board and foil, whether foiling at high speed, pulling tight carves on a wave or making exciting downwinders. During extensive testing, our team became aware of the increased bending and twisting forces that masts with higher aspect ratios experience. This was the starting point for the development of the Indiana Drive mast. The mast features a new strength profile and an advanced material selection that provides unrivalled stiffness and strength for an exceptional foiling experience. The Drive mast's unique one-piece design eliminates potential issues with flow interference and connection problems that can occur with multi-piece mast designs. A special thicker cone near the base plate ensures efficient handling of high loads, ensuring integrity and performance in high-load areas. Thanks to the use of high modulus carbon fibre in the mast construction, the Indiana Drive mast sets new standards in terms of stiffness and strength compared to conventional carbon fibre constructions. An innovative, balanced placement of materials in our production process coupled with rigorous testing has resulted in a breathtaking leap in performance. The ride characteristics are so impressive that it was a challenge to get our team riders to return the prototypes after testing! The Drive masts are compatible with the HP and Monoblock foils and fuselages. ATTENTION: The Indiana Foil HP Carbon Mast Drive HM 85 cm may only be used for front wings up to max. Barracuda XL or 1320 mm span. The warranty is excluded if larger front wings are used.
The Indiana Foil HP Lightning 85 cm carbon mast is the fastest mast from Indiana and was developed for foilers who demand top performance and innovation on the water. This hydrofoil mast is manufactured in Kosovo by the Swiss carbon specialist Carbolink. It is made from high modulus carbon fibre and manufactured in an autoclave, making it the lightest production mast on the market at 1.3 kg. Key features: Extremely light: As the lightest production mast on the market, at just 1.3 kg, the Lightning offers exceptional manoeuvrability and a more direct feel. 14 mm thin profile: With its 14 mm thin profile, the mast offers the highest speed potential and outstanding stability. The Lightning 85 offers high control even in difficult conditions with minimal drag. Ventilation-resistant: The mast has been designed to be highly ventilation-resistant. It ensures smooth and carefree rides and prevents ventilation even under high loads. Premium construction: Made from high modulus carbon fibre and produced in an autoclave, the mast offers a superior strength-to-weight ratio and provides unparalleled durability and agility. Compatibility: This mast is fully compatible with all Indiana HP and Monobloc front wings and fuselages. Standard Plate Mount Hole Spacing: With the standard 90 x 165 mm hole spacing on the mounting plate, the mount is compatible with most boards on the market. Plus 4 additional holes in case the length of the tracks is not sufficient to find the perfect position. ATTENTION: The Indiana Foil HP Carbon Mast Lightning HM 85 cm may only be used for front wings up to max. Marlin XL or 1020 mm span. The warranty is excluded if larger front wings are used.
ULTIMATE DURABILITY AND STRENGTH! Made from high quality aluminium, this mast offers exceptional durability while remaining impressively light. It is the best choice for riders looking for reliable performance without compromise. Whether you're new to foiling or an experienced rider looking for a stiff mast, the CHARGER ALUMINIUM mast will increase your fun on the water! The aluminium masts therefore transfer the steering impulses very quickly and directly from the board to the foil. The Charger masts are supplied with a high-quality protective cover. Only compatible with:Indiana Foil HP Fuselage Alu Adapter V2 Indiana Foil HP Baseplate Alu Care of the aluminium parts: Simply rinse the connections and screws with fresh water after each use. If the foil is not used for a longer period of time, it is best to disassemble it completely.Regularly check the anodes in the aluminium base plate and in the adapter. They degrade after a while, this is normal. This happens more quickly when the foil is used in salt water. The anodes should be replaced if they are broken or cracked. Before reassembling, be sure to coat all screws with a thin layer of Tef-Gel. This helps to prevent them from rusting or seizing!
ULTIMATE DURABILITY AND STRENGTH! Made from high quality aluminium, this mast offers exceptional durability while remaining impressively light. It is the best choice for riders looking for reliable performance without compromise. Whether you're new to foiling or an experienced rider looking for a stiff mast, the CHARGER ALUMINIUM mast will increase your fun on the water! The aluminium masts therefore transfer the steering impulses very quickly and directly from the board to the foil. The Charger masts are supplied with a high-quality protective cover. Only compatible with:Indiana Foil HP Fuselage Alu Adapter V2 Indiana Foil HP Baseplate Alu Care of the aluminium parts: Simply rinse the connections and screws with fresh water after each use. If the foil is not used for a longer period of time, it is best to disassemble it completely.Regularly check the anodes in the aluminium base plate and in the adapter. They degrade after a while, this is normal. This happens more quickly when the foil is used in salt water. The anodes should be replaced if they are broken or cracked. Before reassembling, be sure to coat all screws with a thin layer of Tef-Gel. This helps to prevent them from rusting or seizing!
ULTIMATE DURABILITY AND STRENGTH! Made from high quality aluminium, this mast offers exceptional durability while remaining impressively light. It is the best choice for riders looking for reliable performance without compromise. Whether you're new to foiling or an experienced rider looking for a stiff mast, the CHARGER ALUMINIUM mast will increase your fun on the water! BEGINNERS and schools are perfectly served with the 50 cm length for the first foil attempts! The aluminium masts therefore transfer the steering impulses very quickly and directly from the board to the foil. The Charger masts are supplied with a high-quality protective cover. Only compatible with:Indiana Foil HP Fuselage Alu Adapter V2 Indiana Foil HP Baseplate Alu Care of the aluminium parts: Simply rinse the connections and screws with fresh water after each use. If the foil is not used for a longer period of time, it is best to disassemble it completely.Regularly check the anodes in the aluminium base plate and in the adapter. They degrade after a while, this is normal. This happens more quickly when the foil is used in salt water. The anodes should be replaced if they are broken or cracked. Before reassembling, be sure to coat all screws with a thin layer of Tef-Gel. This helps to prevent them from rusting or seizing!
The Indiana Drive Mast offers a revolutionary innovation in the world of foiling, setting new standards in terms of performance and control. Designed to take the foiling experience to a higher level, the Drive Mast promises a unique connection between the board and foil, whether foiling at high speed, pulling tight carves on a wave or making exciting downwinders. During extensive testing, our team became aware of the increased bending and twisting forces that masts with higher aspect ratios experience. This was the starting point for the development of the Indiana Drive mast. The mast features a new strength profile and an advanced material selection that provides unrivalled stiffness and strength for an exceptional foiling experience. The Drive mast's unique one-piece design eliminates potential issues with flow interference and connection problems that can occur with multi-piece mast designs. A special thicker cone near the base plate ensures efficient handling of high loads, ensuring integrity and performance in high-load areas. Thanks to the use of high modulus carbon fibre in the mast construction, the Indiana Drive mast sets new standards in terms of stiffness and strength compared to conventional carbon fibre constructions. An innovative, balanced placement of materials in our production process coupled with rigorous testing has resulted in a breathtaking leap in performance. The ride characteristics are so impressive that it was a challenge to get our team riders to return the prototypes after testing! The Drive masts are compatible with the HP and Monoblock foils and fuselages. ATTENTION: The Indiana Foil HP Carbon Mast Drive HM 75 cm may only be used for front wings up to max. Barracuda XL or 1320 mm span. The warranty is excluded if larger front wings are used.
Hyperdrive 76 The Hyperdrive 76 UHM sets a new standard for high performance hydrofoil masts from Indiana Foil. Made with ultra high modulus carbon and equipped with an innovative profile, it significantly improves ride comfort and handling for riders of all levels. Designed for precision and stability, this mast delivers the stiffness and responsiveness needed to push the speed limit on the water. The Hyperdrive 76 UHM is the perfect mast for pumping, wake and surf foiling where a lower mast position requires absolute control and less draft. High-performance profile: The slim, hydrodynamicallyoptimised profile is only 12.8 mm thick and therefore offersmaximum speed potential and outstanding stability. The mast ensures precise handling and a stable ride in a wide range of conditions. Innovative construction: Made from ultra high modulus carbon, the mast is manufactured in a steel mould. This design ensures extremely high torsional rigidity, which significantly improves stability and control on the water. The result is an extremely stiff and fast mast. Ventilation-resistant: Thanks to its clever design, the Hyperdrive 76 UHM minimises ventilation, ensures a safe riding experience and does not draw air even at high speeds. Compatibility: It fits seamlessly with all common front wings and fuselages with standard plate mounting (max. 90 x 165 mm). The additional mounting holes offer flexibility in positioning. ATTENTION: Only front wings up to max. Barracuda L or 1050 mm span may be used with the Carbon Mast Hyperdrive UHM 76 cm. The warranty is excluded if larger front wings are used.
Hyperdrive 86 The Hyperdrive 86 UHM sets a new standard for high performance hydrofoil masts from Indiana Foil. Made with ultra high modulus carbon and equipped with an innovative profile, it significantly improves ride comfort and handling for riders of all levels. Designed for precision and stability, this mast delivers the stiffness and responsiveness needed to push the speed limits on the water. The Hyperdrive 86 UHM is the perfect mast for wingfoilers, parawingers,surffoilersand pumpfoilers who want the fastestmast on the water. High-performance profile: The slim, hydrodynamicallyoptimised profile is only 12.8 mm thick and therefore offersmaximum speed potential and outstanding stability. The mast ensures precise handling and stable handling in a wide range of conditions. Innovative construction: Made from ultra high modulus carbon, the mast is manufactured in a steel mould. This design ensures extremely high torsional rigidity, which significantly improves stability and control on the water. The result is an extremely stiff and fast mast. Ventilation-resistant: Thanks to its clever design, the Hyperdrive 86 UHM minimises ventilation, ensures a safe riding experience and does not draw air even at high speeds. Compatibility: It fits seamlessly with all common front wings and fuselages with standard plate mounting (max. 90 x 165 mm). The additional mounting holes offer flexibility in positioning. ATTENTION: With the Indiana Foil HP Carbon Mast Hyperdrive UHM 86 cm, only front wings up to max. Barracuda L or 1050 mm span may be used. The warranty is excluded if larger front wings are used.
Hyperdrive 96 UHM The Hyperdrive 96 UHM sets new standards for high-performance hydrofoil masts from Indiana Foil. Made from Ultra High Modulus Carbon and equipped with an innovative profile, it offers an outstanding combination of stability, responsiveness and riding comfort. Designed for advanced riders who want to achieve maximum performance in applications such as racing, kitefoiling, parawing or pump foiling. The mast guarantees extremely high torsional rigidity, which minimises unwanted deformation and ensures precise, direct handling. The slim profile with a thickness of only 12.8 mm maximises speed potential and stability at high speed, while the proven construction ensures exceptional durability. The aerodynamic design reduces drag and ensures efficient water behaviour and immediate feedback when riding. The Hyperdrive 96 UHM is the perfect mast for kitefoilers, wingfoilers and tow-in-foilers who want the fastest and longest mast in the Indiana range. High performance profile: The slim, hydrodynamicallyoptimised profile with 12.8 mm thickness maximises speed potential and stability. The mast ensures precise handling and a stable ride in a wide range of conditions. Innovative construction: Made from ultra high modulus carbon, the mast is manufacturedin a steel mould. This design ensures extremely high torsional rigidity, which significantly improves stability and control on the water. The result is an extremely stiff and fast mast. Ventilation-resistant: Thanks to its clever design, the Hyperdrive 96 UHM minimises ventilation, ensures a safe riding experience and does not draw air even at high speeds. Compatibility: It fits seamlessly with all standard Indianafront wings and fuselages and has the standard hole pattern (90 x 165 mm). The additional inner mounting holes offer flexibility in positioning. ATTENTION: With the Indiana Foil HP Carbon Mast Hyperdrive UHM96 cm, only front wings up to max. Barracuda L or 1050 mm spanmay be used. The warranty is excluded if larger wings are used.
The new Ultra High Modulus Prepreg Carbon masts are significantly thinner and faster than the standard carbon masts, with a reduction in thickness of over 15% and increased bending and torsional stiffness at the same time.HM80: Ideal for disciplines without wind power such as surf, pump and downwind. Shorter chord lengths reduce drag and improve manoeuvrability, allowing more glide and more efficient pumping.HM85: For all disciplines, especially wing-foiling. Provides a longer chord length in the underwater mast area for better lift and speed in wind power. Maximises stiffness without additional drag.HM105: Optimised for racing, with an even thinner thickness in the underwater mast area for maximum top speed. Not suitable for jumping, but offers excellent lift and low drag height for high speeds.All masts offer an improved shape in the underwater area, which reduces drag and enables higher top speeds with less ventilation.
The AF80 is an aluminium mast that won't break your budget and is perfect for wingfoiling.*Sonar Foil Board Adaptor AF N10.210090 sold separately!
Shimming the mast under the leading edge trims the board nose up and helps you to achieve a more comfortable stance and control of the board at higher speeds. Shimming the mast under the trailing edge trims the board nose down at lower speeds (e.g. when pumping, dock launching or downwind), allowing the foil to engage earlier. NOTE: North boards and foils are designed to work together for each discipline without the need for a shim. However, the mast shim can be useful when mixing different brands of boards and foils or when using a particular board or foil in conditions for which it was not designed.
The refined aluminium foil mast profile offers the best balance between low weight and increased strength for higher loads. The AF95 mast is 30% stiffer than the AK95 mast, but only 13% heavier, increasing overall performance in choppy conditions.
The new top quality pre-preg carbon mast delivers a stiffer, more direct feel and feedback. Tapered for optimal load transfer and reduced surface friction, the refined one-piece design is a strong, durable and corrosion-free choice for all disciplines. The CF72 mast is ideal for shallower waters and prone surf foiling. The longer CF85 mast increases overall performance in choppy conditions. Connection: GeoLock.