The Stabiliser 550 has been developed for maximum stability and pumping performance. The winglets ensure maximum yaw and roll resistance. The optimised profile distribution and outline curve prevent ventilation. Supplied with high quality protective cover. To create a complete foil, you need to follow these seven steps: Step 1: Choose one of six front wings Step 2: Choose one of three stabilisers Step 3: Choose one of two Fuselages Step 4: Choose the Set of Angle Adaptors Step 5: Choose one of three mast lengths Step 6: If you have a board with two US Fin Boxes/Tracks, choose a Baseplate. If you have a Deep Tuttle/Tuttle Box, choose a Deep Tuttle/Tuttle Adaptor Head AND the Tuttle Adaptor Plate. Step 7: Select the Set of Mast / Fuselage Screws Step 8: Supply yourself with TefGel All foil parts can be combined with each other!

The Stabiliser 420 is suitable for higher foil speeds. Kitesurfers have fun with it, but dock launch foilers can also fly over the water with little energy expenditure. Supplied with a high-quality protective cover. To create a complete foil, you need to follow these seven steps: Step 1: Choose one of six front wings Step 2: Choose one of three stabilisers Step 3: Choose one of two Fuselages Step 4: Choose the Set of Angle Adaptors Step 5: Choose one of three mast lengths Step 6: If you have a board with two US Fin Boxes/Tracks, choose a Baseplate. If you have a Deep Tuttle/Tuttle Box, choose a Deep Tuttle/Tuttle Adaptor Head AND the Tuttle Adaptor Plate. Step 7: Select the Set of Mast / Fuselage Screws Step 8: Supply yourself with TefGel All foil parts can be combined with each other!

The Stabilizer 370 has been designed for maximum manoeuvrability and speed without compromising on stability. The trailing edge reduces drag at the tips and allows for easier turning, while the wider surface in the centre guarantees stability. This guarantees great control when turning in faster waves. Comes with a high quality protective cover. To create a complete foil, you need to follow these seven steps: Step 1: Choose one of six front wings Step 2: Choose one of three stabilisers Step 3: Choose one of two Fuselages Step 4: Choose the Set of Angle Adaptors Step 5: Choose one of three mast lengths Step 6: If you have a board with two US Fin Boxes/Tracks, choose a Baseplate. If you have a Deep Tuttle/Tuttle Box, choose a Deep Tuttle/Tuttle Adaptor Head AND the Tuttle Adaptor Plate. Step 7: Select the Set of Mast / Fuselage Screws Step 8: Supply yourself with TefGel All foil parts can be combined with each other!

The High Performance Stabilizers have a high aspect ratio for optimised glide and pitch stability and the straight shape maximises agility on the axle. These properties, coupled with the ultra-light weight and efficient mould production of the Carbon Stabilizers, make the product a real high-performance game changer. Due to its maximum stability, the 520 is particularly suitable for beginners and heavier riders and can be pumped, wing-foiled or surf-foiled.

The High Performance Stabilizers have a high aspect ratio for optimised glide and pitch stability and the straight shape maximises agility on the axle. These properties, coupled with the ultra-light weight and efficient mould production of the Carbon Stabilizers, make the product a real high-performance game changer. The 420 is the perfect all-rounder for all riders. It offers a good balance between stability and agility and is suitable for all conditions and every foiling discipline.

The fast High Performance Stabiliser 370 was designed for the M-AR front wings. It delivers great carving performance, is agile in the roll axis and stable in the yaw axis.

(0.5, 1 & 2 degrees) The stabiliser's job is to ensure that the foil flies straight and stable. Think of it like the suspension in a car. Conditions and user preferences can vary and change which setup feels best. Shims are used to change the angle of attack and control the amount of pitch and roll stability the stabiliser creates throughout the foil system. The Indiana Carbon Fuselage has an inbuilt 1° angle as standard. To increase stability and front foot pressure, the kit comes with 3 shims. +.5°, +1° and +2°. The higher the angle of attack, the more stable the foil flies. Material: 100% PA Colour: Green Made in China

The FM Stabiliser Ride XL is designed for stability and comfort for freeride progression. It is perfect for beginners and advanced riders who want a supportive, easy-to-control stabiliser. The FM Stabilizer Ride XL has a span of 450 mm, a chord of 80 mm, a profile of 8 mm, a projected area of 300 cm², a volume of 140 cm³, an aspect ratio of 6.75 and a weight of 220 g. Assisted planing and pumping The wide chord generates lift for easy cruising and early take-off. High pumpability values help riders maintain speed and link transitions seamlessly. Stable and predictable handling High roll and pitch stability give beginners confidence. The FM Stabiliser Ride XL provides a forgiving, stable platform for learning and progressing in pumping, downwind, surfing and wing foiling. Areas of use and riding level Ideal for freeride, pumping, downwind, surfing and wing foiling progression and learning, especially for beginners and advanced beginners. Shim tuning The FM Stabilizer Ride XL can be tuned with the Indiana Flat Shim Sets for individual adjustments of lift and pitch. Accessories The Stabiliser is supplied with a high-quality protective cover and screws.

The FM Stabiliser Marlin M is designed for foilers looking for balanced lift, smooth planing and forgiving control. It is an excellent choice for advanced riders in wing-foiling, pump-foiling, surf-foiling, downwind and kite-foiling and provides a stable, confidence-building platform that supports both learning and advanced manoeuvres. The FM Stabiliser Marlin M has a span of 390 mm, a chord of 68 mm, a profile of 6.8 mm, a projected area of 210 cm², a volume of 90 cm³, an aspect ratio of 7.2 and weighs 135 g. Smooth, predictable glide and pumping support With high ratings in pumpability and roll, the FM Stabiliser Marlin M supports smooth cruising and easy connection of transitions. Its glide is forgiving and consistent, ideal for riders who want to maintain flow and control in turns and on the wave. The efficient profile of the Stabiliser helps to save energy during long sessions and supports sustainable pumping. Stable roll and pitch control High values in roll and pitch stability ensure that the FM Stabiliser Marlin M provides a secure, firm feeling underfoot. It is well suited for riders who are learning to carve or for anyone looking for a stabiliser that supports balance and control even at increasing speeds. The geometry provides predictable feedback in transitions and is suitable for both aggressive carving and fluid, harmonious lines. Responsive yaw control and versatile use With strong values in yaw agility, the FM Stabiliser Marlin M enables precise directional changes and intuitive handling. It is powerful in wing-foiling, pump-foiling, surf-foiling, downwind and kite-foiling and is particularly suitable for advanced and professional riders, but also remains accessible to ambitious beginners looking for a stabiliser to support their further development. Shim adjustment The FM Stabiliser Marlin M can be adjusted with Indiana Flat Shim Sets so that pitch, lift and front foot pressure can be adapted to personal preferences and conditions. Accessories The stabiliser is supplied with a high-quality protective cover and screws.

The FM Stabiliser Marlin S is designed for foilers looking for agility and fast responsiveness. Suitable for wing-foiling, surf-foiling, pump-foiling and downwind-foiling, it delivers lively transitions and dynamic control. The FM Stabiliser Marlin S has a span of 360 mm, a chord of 66 mm, a profile of 6.6 mm, a projected area of 190 cm², a volume of 80 cm³, an aspect ratio of 6.8 and weighs 120 g. Responsive glide and pumping support High pumpability and roll ratings support a smooth, consistent glide with fast acceleration. The efficient profile of the Stabiliser helps to maintain speed and flow through turns and transitions. High agility and dynamic control Excellent values in roll and pitch ensure lively transitions, ideal for carving and freestyle. The FM Stabilizer Marlin S responds instantly to rider input, making it perfect for advanced foilers who want maximum manoeuvrability. Discipline and suitability Powerful in wing foiling, surf foiling, pump foiling and downwind foiling, especially for advanced and professional riders who value agility and responsiveness. Shim setting The FM Stabiliser Marlin S can be adjusted with Indiana Flat Shim Sets so that pitch and lift can be adapted to personal preferences and conditions. Accessories The stabiliser is supplied with a high-quality protective cover and screws.

The FM Stabiliser Barracuda L was developed for foilers looking for increased stability, efficiency and controlled planing at higher speeds. Designed for wing-, pump-, surf-, downwind- and kite-foiling, it offers a smooth, confident ride for ambitious riders who value predictability and confidence. The FM Stabiliser Barracuda L has a span of 395 mm, a depth of 57 mm, a thin 4.6 mm profile, a projected area of 158 cm², a volume of 42.6 cm³, an aspect ratio of 10.0 and a weight of 90 g. The larger span and higher aspect ratio compared to the Barracuda M provide additional pitch stability and smoother tracking with efficient water release. Early takeoff and pumping efficiency With strong low takeoff speed and pumpability ratings, the FM Stabiliser Barracuda L supports early takeoff and smooth, energy-efficient pumping. The additional surface area makes it easier to maintain speed with less effort - ideal for consistent pump cycles, longer runs and controlled dock starts. Stable turns and yaw control Balanced yaw characteristics give the Barracuda L a smooth and reliable behaviour in turns. It favours smooth, predictable directional changes rather than maximum agility and therefore offers a lot of safety at higher speeds and in long, flowing lines. Balanced roll and pitch stability With high values in roll and pitch, the FM Stabiliser Barracuda L offers an extremely stable platform. It provides constant feedback in transitions and remains easy to control even at higher speeds - ideal for efficient cruising, downwind foiling and controlled carving. Discipline and level suitability The FM Stabiliser Barracuda L excels in wing-, pump-, surf-, downwind- and kite-foiling. It is particularly suitable for advanced and pro riders looking for additional stability and glide. Motivated beginners will also benefit from its predictable, confidence-building behaviour. Shim tuning The FM Stabiliser Barracuda L can be fine-tuned with the Indiana Flat Shim Sets to optimally adapt pitch, lift and front-foot pressure to the setup, riding style and conditions. Accessories The stabiliser is supplied with a high-quality protective cover and screws

The FM Stabilizer Barracuda S is designed for foilers who prioritise agility and speed in the disciplines of wing-foiling, pump-foiling, surf-foiling, downwind and kite-foiling. It offers a compact, responsive ride for technical foiling. The Barracuda S has a span of 325 mm, a chord of 58 mm, a profile of 5.2 mm, a projected area of 132.8 cm², a volume of 49 cm³, an aspect ratio of 7.9 and weighs 70 g. Efficient gliding and pumping Thanks to its high pumpability and low takeoff speed ratings, the FM Stabiliser Barracuda S supports fast takeoffs and long-lasting, energy-efficient pumping. Its low resistance and compact shape make it ideal for maintaining speed and linking turns smoothly. Responsive carves and yaw control Top values in yaw agility and high ratings in roll and pitch enable tight carves and fast manoeuvres. The Stabiliser reacts immediately to rider input and is perfect for advanced foilers who want maximum control in dynamic conditions. Discipline and suitability The FM Stabiliser Barracuda S is ideal for wing-foiling, pump-foiling, surf-foiling, downwind and kite-foiling. It is primarily aimed at advanced and professional riders who expect agility and precision from their stabiliser. Shim setting The FM Stabilizer Barracuda S can be adjusted with Indiana Flat Shim Sets so that pitch and lift can be adapted to personal preferences and conditions. Accessories The stabiliser is supplied with a high-quality protective cover and screws.

The Indiana Foil MB Tail M/S is an essential part of the Indiana Monobloc Carbon Front Wings and is designed to maximise stiffness, efficiency and adjustability in the Monobloc system. The MB Tail M/S connects to the front wing behind the mast slot - in an area where the structural loads are reduced. Despite this load-optimised position, the geometry of the connection is directly inspired by the monobloc design and ensures an extremely robust and stiff unit with excellent power transmission. At the tail, the stabiliser mount is designed with a precisely defined angle so that the front wing lifts off easily and flies efficiently. The MB Tail M/S offers two positions for the stabiliser, allowing the rider to precisely adjust the stability and agility of the foil. Thanks to the full carbon construction, the weight remains extremely low while maintaining a high torsional stiffness. The result: improved overall stability maximum pumping efficiency direct, precise foil feedback The MB Tail M/S is compatible with all flat mount stabilisers and shims and is designed exclusively for use with Indiana Monobloc Front Wings. Specifications - Indiana Foil MB Tail M/S Length: 423.7 mmWeight: 270 gEffective tail lengths: 670 / 635 mm (depending on stabiliser position)

The Indiana Foil MB Tail XS/XXS is aimed at riders looking for a short, compact tail with maximum stiffness and minimum weight for performance-orientated foiling. The MB Tail XXS/XS connects to the front wing behind the mast slot - in an area where the structural loads are reduced. Despite this load-optimised position, the geometry of the connection is directly inspired by the monobloc design and ensures an extremely robust and stiff unit with excellent power transmission. The stabiliser mount at the tail is designed so that the front wing flies easily, efficiently and with low drag - particularly advantageous when pump-foiling and during technical manoeuvres. Thanks to two stabiliser positions, you can choose between more stability or maximum agility. The full carbon construction keeps the weight extremely low and provides support: fast reactions efficient pumping precise control of the foil The MB Tail XS/XXS is compatible with all Flat Moun) stabilisers and shims and is designed exclusively for Indiana Monobloc Front Wings. Specifications - Indiana Foil MB Tail XS/XXS Length: 353.7 mmWeight: 230 gEffective tail lengths: 600 / 565 mm (depending on stabiliser position)

The FM Stabiliser Condor M combines stability and agility for pumping, surfing, downwind and wing foiling. It is particularly suitable for advanced riders who are looking for a stabiliser that supports both long, efficient planing phases and fast, responsive turns. The FM Stabilizer Condor M has a span of 355 mm, a chord of 59 mm, a profile of 5.7 mm, a projected area of 155 cm², a volume of 48 cm³, an aspect ratio of 8.1 and weighs 80 g. Efficient glide and acceleration High pumpability values enable long sequences and constant speed. The efficient profile of the Stabiliser helps to save energy during longer sessions. Agile but controlled handling High values in yaw, roll and pitch ensure a balanced combination of responsiveness and stability. The FM Stabiliser Condor M offers a stable yet lively platform, ideal for aggressive carving as well as fluid, harmonious lines. Discipline and suitability Particularly suitable for advanced riders in surf, pump, downwind and wing foiling who are looking for a versatile stabiliser. Shim setting The FM Stabiliser Condor M can be adjusted with Indiana Flat Shim Sets to adapt pitch and lift to personal preferences and conditions. Accessories The stabiliser is supplied with a high-quality protective cover and screws.

The FM Stabiliser Marlin XS is designed for maximum agility and precision in surf and pump foiling. It is ideal for advanced riders who are looking for a particularly responsive stabiliser for tight, technical turns. The FM Stabiliser Marlin XS has a span of 330 mm, a chord of 64 mm, a profile of 6.1 mm, a projected area of 170 cm², a volume of 60 cm³, an aspect ratio of 6.4 and weighs 95 g. Efficient, compact gliding and pumping High ratings in pumpability and roll ensure a surprisingly powerful glide despite its compact size. The FM Stabiliser Marlin XS supports fast transitions and maintains momentum even in tight turns. Fast, precise control Excellent values in roll, pitch and yaw make it perfect for technical skiing. The compact shape and responsive geometry of the Stabilizer enable fast, precise manoeuvres. Discipline and suitability Particularly suitable for advanced wing, surf and pump foilers who demand maximum agility and control. Shim adjustment The FM Stabiliser Marlin XS can be fine-tuned with Indiana Flat Shim Sets to adapt pitch, lift and front-foot pressure to personal preferences and conditions. Accessories The stabiliser is supplied with a high-quality protective cover and screws.

The 160, 180, 200 and 220 Arc Down stabilisers are ideal for highly efficient pumping and planing, high speed and turning corners. The G10 construction provides strength, rigidity and durability.

The 160 and 180 Rhythm stabilisers are ideal for speed and glide efficiency. Generating slightly more lift than the Arc Down stabiliser, the Rhythm stabiliser allows the use of a smaller rear wing for less drag. The thinner profile allows some flex for suspension when pumping.

FM Stabiliser Condor S The FM Stabiliser Condor S is designed for advanced technical pump-, surf-, downwind- and wing-foiling. It is perfect for riders who expect maximum precision and agility. The FM Stabilizer Condor S has a span of 290 mm, a chord of 50 mm, a profile of 5.3 mm, a projected area of 110 cm², a volume of 32 cm³, an aspect ratio of 7.6 and weighs 58 g. Agile gliding and pumping High pumpability and glide values support the efficient connection of pumping movements and transitions. The compact shape of the Stabiliser helps to maintain momentum even in technical lines. Precise, responsive handling Top values in yaw, roll and pitch ensure an extremely direct feel. The FM Stabiliser Condor S reacts immediately to rider input and is ideal for advanced foilers who want maximum control. Discipline and suitability Perfectly suited for advanced pump, surf, downwind and wing foiling riders who value precision and agility. Shim setting The FM Stabiliser Condor S can be finely adjusted with Indiana Flat Shim Sets to adapt pitch and lift to personal preferences and conditions. Accessories The stabiliser is supplied with a high-quality protective cover and screws.

The FM Stabilizer Condor L is optimised for long-distance pumping and downwind foiling. It is ideal for advanced riders who want efficient cruising and stable control over long distances. The FM Stabilizer Condor L has a span of 378 mm, a chord of 68 mm, a profile of 6.5 mm, a projected area of 194 cm², a volume of 70 cm³, an aspect ratio of 7.4 and weighs 110 g. Long distance glide and pumping High pumpability and glide ratings support efficient cruising and long-lasting pumping. The large span and high aspect ratio help to maintain speed and flow over long distances. Stable, predictable control High roll and pitch stability values provide confidence on long runs and make it easier to maintain balance and control. Discipline and suitability Particularly suitable for advanced pump, downwind and wing foilers who value stability and efficiency. Shim adjustment The FM Stabiliser Condor L can be adjusted with Indiana Flat Shim Sets to adapt lift and pitch to personal preferences and conditions. Accessories The stabiliser is supplied with a high-quality protective cover and screws.