The Sonar Prime Edition from North was developed to make it easier to start foiling and to shorten the learning curve. It is the ideal starter kit for all foil disciplines and is fully compatible with all North Foil products.The kit contains:Prime Mid Aspect Front Wing (MA1200v2 to MA2400v2)Freeride/0 Series StabiliserA700 hullAluminium AF80 mastAF Board AdapterThe E-glass front wings offer the same performance, durability and impact resistance as the carbon versions, but at a lower price. The Prime Edition comes in a spacious, padded bag with room for all components, screws, tools and marine grease. All Sonar Foil systems are compatible with foil boards with a standard 165x90mm mast track.
associated quickrelease: 00.00.80 compatible with Neil Pryde / Gaastra / Sunshine
FOIL FREERACEThe HyperLite morphs the Hyper with the FoilGlide - featuring the lightweight sleeve width and handling of the FoilGlide and the shaping of the Hyper.More freerace orientated than the FoilGlide, the HyperLite is a faster sail, matching perfectly with the Alien and the Hydro.Much lighter than the Hyper, handling will be unmatched - blast for hours.Following Severne's ideology, everything is simplified. An Xtended range drastically reduces the need for many sizes. The HyperLite is offered in just four sizes. Rig it on our RDM mast and Enigma 160 boom for the ultimate experience.HyperLite will define the foil freerace category. Go fast for hours, go exploring, experience the freedom.
Utilising the highest quality T800 carbon from Toray, the RDM Red is one of the lightest masts available today whilst still being strong enough for wave use. Adds incredible performance to all wave and freestyle sails. / ULTRALIGHT (1.3KG FOR 400) / +7 MEASURED OFFSET ACCURACY/ SLIPLOK PREVENTS BOOM FROM SLIDING/ OVERSIZED EVA FERRULE PLUG TO CLEAN THE INSIDE OF THE TOP SECTION WHEN JOINING THE MAST.
Looking for a windfoil that's fun? The medium windfoil set is the perfect balance of agility, speed and handling. The 850 S front wing has a huge usable range, with a low take-off speed and an amazing high end. The compact outline enables tight carves and makes manoeuvres dynamic and fun. The windfoil fuselage has 3 stabiliser positions, allowing you to choose how stable or manoeuvrable the setup should be. The geometry of the fuselage and the deep tuttle head adapter make this foil compatible with any windsurf board with a deep tuttle box. The T16 aluminium is durable and stiff and, in combination with the zinc anodes, is protected against oxidation.The Indiana Regular Foil System is modular and can easily be upgraded to any other front wing, fuselage, stabiliser or mast in the Regular Range.The front wing, stabiliser and mast are all supplied with protective covers to protect the foil.Total weight: 5.33 kgThis is included:- Indiana Foil Front Wing 850S (with sleeve)- Indiana Foil Stabiliser 550 (with sleeve)- Indiana Foil Aluminium Mast 75 cm (without sleeve)- Indiana Foil Deep Tuttle Head Alu (incl. Zinc Anode & Screws)- Indiana Foil Windfoil Fuselage (incl. Cartridge)- Indiana Foil Tuttle Plate- Indiana Foil Set of Mast / Fuselage Screws (M8)- Indiana Foil Set of Stab Angle Adaptors The area information printed on the front wing is unfortunately not correct. The area information here in the shop corresponds to the correct projected area in cm².
With the 134 Wind Foil Board, our shaper Andi Widmann has developed a thoroughbred windfoil board. It is aimed at heavier windfoilers and beginners who want to start flying in light winds. The four Velcro footstraps supplied can be mounted in the centre or further out. A comfortable handle is positioned in front of the foil holder and makes it easy to carry the complete set. The optimised bottom curve ensures easier planing and smoother touchdowns. The new dome deck ensures a more comfortable stance and more control during manoeuvres.
With the 110 Wind Foil Board, our shaper Andi Widmann has developed a thoroughbred windfoil board. It is aimed at lighter and ambitious windfoilers who want to fly in all conditions. The four Velcro footstraps supplied can be mounted in the centre or further out. A comfortable handle is positioned in front of the foil holder and makes it easy to carry the complete set. The optimised bottom curve ensures easier planing and smoother touchdowns. The new dome deck ensures a more comfortable stance and more control during manoeuvres.
The All In One 166 can be SUP surfed, wing surfed in light winds thanks to the central hyperflow fin, SUP foiled and wing foiled using the foil holder. The generous volume and the wide, straight tail make it easy to get into the line-up or safely back to land in calm conditions. The carbon-PVC sandwich on the deck makes the board very robust.
associated quickrelease: 00.00.80 compatible with Neil Pryde / Gaastra / Sunshine
associated quickrelease: 00.00.80 compatible with Neil Pryde / Gaastra / Sunshine