Designed for short distances on hard ground or sand. Can easily transport 3 SUPs.Good wheels, no noise, no leaksCompactStrap includedCapacity 36 kg (80 LBS)Size: 61 x 28 x 26cm Folded: 61 x 28 x 8 cmWeighs only 3.1 kg
Simple assembly. Fastening is done by passing the straps through the inside of the trolley.Capacity: 2 shortboards on top of each other or 1 longboard (foam is 90 cm wide)Strong polyester with metal bucklescomplete with 4 straps.Lay the two foam pieces flat on the roof of the car, then the front strap goes through the open driver and passenger doors and runs behind the heads of the driver and passenger. Repeat this for the rear belt. Pass the belt through the buckle, tighten it and secure the boards to the roof with the remaining length of belt. Do not run the belts through the open windows of your vehicle with the doors closed - you will not be able to open the doors. Check regularly that the straps are tight enough. Observe the regulations for items transported on roof racks.FAQ: Can I drive on the motorway with my inflatable sup- board on my car roof? Yes. It is allowed by law. We advise not to drive faster than 100 kmh and only to cover short distances.
Scope of delivery=2 metal frames + fixing material. (according to illustration)You can place 1 supboard / Wingdsurf / surfboard / wingboard + 2 paddles on itMade of robust steel with soft foam paddingEasy to assembleTechnical data:Dimensions of individual holder: approx. 38 x 42 cmMaximum load capacity: 55 kgColour: red / black
Practical for retrofitting to inflatable sup boardsTo stick on sup- board pad approx. 8 cm in sizeCan be used as luggage net eyelets or as leash eyelets (no towing eyelet)Large adhesive surfaceWhite or blackSupplied without adhesive
These fenders stay in place and can be stowed under the boat seats. They can be hinged to wrap around the gunwale and hull to fit the contours of the boat. The fenders are made of marine grade trilaminate cover with closed cell foam inside. There is a sturdy polycarbonate grommet at each end for hanging from cleats.
Rowing, rowing or motorised, in the harbour or at anchor, the Sportyak 245 is the ideal way to get your boat out. On holiday, it becomes the perfect rowing boat for the whole family and is ideal for children to experience the joy of "boat play". The 245 is lightweight for its size and features a super-stable hull design for added comfort and ease of use. The innovative wheel transport system makes transport a breeze. High-quality accessories include an adjustable rowing bench, two oar holders, multiple carry handles, a self-draining plug so you can leave your dinghy at anchor, and deck lines for added safety.Size and specification:
Length:8'05" / 245 cmWidth:120 cm (3'11.2")Weight:86 lbs / 39 kgMaximum load:195 kg / 430 lbsCapacity:3 personsFeatures:CATAMARAN FRAMEFor excellent stabilityDRAIN PLUG ABOVE WATERLINE Allows draining at anchorWHEEL TRANSPORT SYSTEM For easy transport on any terrain
2 OAR LOOP POSITIONSAdapts to the number of passengersHOLLOW CHAMBER PLATE TECHNOLOGYLight weight for its size>REINFORCED TRANSOMSuitable for small engines (under 2 hp) Suitable for: The Sportyak 245 is a medium sized dinghy suitable for a wide range of applications. More stable, stronger and lighter than conventional boats thanks to the double hull and double sheet construction
Distribution valve made of nickel-plated brass. Red lacquered steel lever. Working temperature from -10° to +100°.For water, petrol, heating and non-corrosive liquids.
Made of polyester with waterproof polyurethane coating. The elastic all around ensures that the tarpaulin fits the boat better. UV-resistant. Double seams, fitted with rings all round to tighten the tarpaulin.
Made of highly polished stainless steel. Steps with non-slip plastic tread.Attaches to the corridor plate with 2 (included) stainless steel plates and an adjustable strap with stainless steel locking buckle.Suitable for inflatable boat air chambers up to Ø 500 mm. With handle for pulling up.
Two-ply eva 100 + PE 30, materials with closed cells, buoyant and oil-resistant. Very robust and elastic. Can also be used as a cushion or buoyancy aid in an emergency.
Construction made of hot-dip galvanised cast steel. Due to the shaft thickening, the counterweight holds the anchor better on the bottom (Norwegian SAV system). Finished in mirror polished AISI 316 stainless steel, ideal for dinghies.