1500The 1500 is a playful and fast foil for fast turns and higher speed. The 1500 cm2 front wing has a lift of 12 knots (3-4 Beaufort) even with a light wind. The name drive comes from the feeling you get when quad biking. In choppy waters or if you make a mistake, the drive remains trimmed like a 4×4 and does not tip downwards. The propulsion is maintained. The fuselage has an additional position to mount the tailwing further back, which increases length stability for heavy riders or when windfoiling. The production in a premium factory guarantees durability. The titanium screws do not corrode, so you can leave your foil mounted for a very long time without the problem of it coming loose later. The set comes with bag and wing covers that also fit while the foil is mounted.Who is it for?The 1500 is a playful and fast foil for fast turns and higher speeds. The 1500 cm2 front wing has lift even at light wind speeds. For experienced riders from 12 knots (3-4 bft). Specifications: Technical data: 1500 cm2 front wing with 87 cm span; rear wing with a span of 42 cm; 70 cm fuselage; 75 cm mast; The 1500 is slightly more playful than the 2100. It also has a higher top speed. Details Front wing: The front wing is shaped even more towards the HA High Aspect. It is still a comfortable foil to drive but is fully radical in corners and jumps.Included (complete set): 3K carbon front and rear wing. Aluminium mast, fuselage and top plate (fits 90 foilbox-board each). Titanium screws (no rust, no corrosion). The set comes with bag and wing covers, which also fit while the foil is mounted With side pocket for small parts. Maintenance set. Tungsten carbide Torx spanner to prevent wear and keep the screws in good condition. English and German manual with assembly, maintenance, technology and safety tips.Keypoints: Pro Version full 100% 3K carbonMedium-aspect carbon hydrofoil for wingfoiling. Can also be used for wind, sup and wake foiling.The drive 1500 is a playful and fast wing foilThe 1500 cm2 front wing has lift even in light wind winds. At 12 knots (3-4 Beaufort) it can already reach the top.It increases its speed when the wind gets stronger - the trim remains perfect.The drive offers you enormous potential for further development.Stiffest alloy for mast and hull and 3K impact resistant carbon wings. The screws are made of titanium to prevent corrosion - all screws same size Torx (super easy assembly)Compatible with all wingfoil boards and all boards that have 2 boxes (US boxes).1500 cm2 front wing with 87cm span; rear wing with 42cm spanAvailable in 2 sizes: 2100 cm2/99.5 cm wingspan; and a 1500 cm2/xx cm wingspanMast options: 75/83 cm2100 The 2100 is an all-rounder. Large surface area for very early lift. For light riders from 8 knots (2-3 bft), for heavier riders from 12 knots (3-4 bft). And above all, when the wind gets strong, the foil becomes very fast and remains stable. The name drive comes from the feeling you get when quad biking. In choppy waters or if you make a mistake, the drive remains trimmed like a 4×4 and does not tip downwards. The propulsion is maintained. The fuselage has an additional position to mount the tailwing further back, which increases length stability for heavy riders or when windfoiling. The production in a premium factory guarantees durability. The titanium screws do not corrode, so you can leave your foil mounted for a very long time without the problem of it coming loose later. The set comes with bag and wing covers that also fit while the foil is mounted.For whom?Medium-aspect carbon hydrofoil for wingfoiling. Can also be used for wind, sup and wake foiling.The drive offers you enormous potential for your further development.Specifications: Technical data: 2100 cm2 front wing with 99.5cm wingspan; Rear wing with 51cm spanIncluded (complete set): 3K carbon front and rear wings; aluminium mast, fuselage and top plate (each matching 90 foilbox-board). Titanium screws (no rust, no corrosion). The set comes with bag and wing covers, which also fit while the foil is mounted it side pocket for small parts. Maintenance kit. Torx spanner. English and German manual with assembly, maintenance, technology and safety tips.Keypoints:
pro Version full 100% 3K carbonMedium-aspect carbon hydrofoil for wingfoiling. Can also be used for wind, sup and wake foiling.It increases its speed when the wind gets stronger - the trim remains perfect.Stiffest alloy for mast and hull and 3K impact-resistant carbon wings. The screws are made of titanium to prevent corrosion.Compatible with all wingfoil boards and all boards that have 2 boxes (US boxes).2100 cm2 front wing with 99.5cm span; rear wing with 51cm spanAvailable in 2 sizes: 2100 cm2/99.5 cm wingspan; and a 1500 cm2/xx cm wingspanMast options: 75/83 cm
The Trackster foil is a medium to low aspect ratio carbon fibre front/rear wing, aluminium mast and fuselage that provides the rider with a simple and stable foiling platform. It's quick to get on the foil and when stationary, it planes forever.Specification:
ensis TRACKSTER 1700 Wing size: 2.5 - 5.2 m2 Weight of the rider: 55 - 85 kgWind range: 12 - 28 knotsFront wing area: 1700 cm2
Front wing Wingspan: 85 cm
Rear wing area: 360 cm2
Rear wing Wingspan: 40 cm
Fuselage: 63 cm
Mast: 82 cm ensis TRACKSTER 1900Wing size: 3.5 - 6.2 m2Weight of the rider: 65 - 100 kgWind range: 12 - 20 knotsFront wing area: 1900 cm2
Front wing Wingspan: 90 cm
Rear wing area: 360 cm2
Rear wing Wingspan: 40 cm
Fuselage: 75 cm
Mast: 82 cmSuitable for:
This foil is perfect for freeride winging or pumping.
The 1750foil for lighter people or stronger wind
The 1950 for heavier people or weaker wind
The ensis FLOW with medium aspect ratio is for all athletes who are looking for a versatile high-performance foil. The delta shape of the front wing enables incredibly early flying and combines all the relevant characteristics for use in windsurfing, wing, surf and sup foiling in a wide wind range. Thanks to the 90 cm long hull, the foil is ultra-stable and at the same time offers great manoeuvrability, which is appreciated by explorers and experts alike. For experts, the foil guarantees a great pop for high jumps and safe landings. High quality, made in Europe. Specification: front wing: 1500 cm2,
rear wing: 450 mm,
fuselage: 90 cm,
mast: 82 cm carbon High Modulus TPPerformance of the windsurfing foil Sail: 4.4 - 6.2 m2Wind range: 5 - 25 knots wing, surf, sup foil Performance Wing sizes: 2.5 - 5.2 m2 Wind range: 5 - 25 knots Characteristics:
Smooth and early lift in 4 sportsThe delta shape of the front wing ensures an early and smooth take-off and combines all the relevant characteristics for use in windsurfing, wing, surf and sup foiling.Stability and control The optimised length of the fuselage provides stability and control. The front and rear wings are ideally balanced and thanks to the winglets you fly as if on rails.Extremely manoeuvrable The 90 cm long aluminium fuselage ensures great manoeuvrability and yet high stability. The stiff carbon mast ensures direct power transmission to further improve manoeuvrability. Technical features:
Light and stiff The 82 cm carbon mast is the perfect length for pumping and gliding through the waves.Mounting plate for foil positioning options Mount the foil in any double us-box and position it according to weight, riding style and wind conditions. Mounting memory system Found the optimum foil position? The brass nuts can be fixed with the small grub screws in the us-box. Simple and secure fastening The M8 stainless steel screws and the supplied Allen key allow easy and firm attachment to the board.Suitable for:Windsurf foil PerformanceThe ensis FLOW is designed for foil- freeride beginners through to foil- freestyle experts. Wing, surf, sup foil PerformanceThe ensis FLOW is ideal for each of these 3 sports. The 90 cm long hull ensures early and gentle buoyancy.
1500 cm2The Flite range with aluminium mast and fuselage focuses on the important discovery and progression phase, where plug-and-play accessibility, lift-off and stability in flight will quickly get you hooked on the thrill of wing foiling.The FLITE 2000 is equipped with a 1500 cm2 front wing, 450 cm2 rear wing and 75 cm mast length as Low Aspect Ratio (5.4) for better control and stability, perfect for beginners and advanced pilots.
flight foil has been designed and configured with the best materials available. The base, mast and fuselage are made of aluminium and the front and rear wings are made of military grade prepreg carbon fibre.All front and rear wings, the T-bar and the fuselage are interchangeable and allow you to fine-tune the equipment to your weight, riding style and conditions. The forged carbon mast base has slotted open ends for quick assembly and disassembly. It is also extremely durable.Specification:Mast length: 75 cm / 29 inches Fuselage length: 85 cm (33 inches) Front wing area: 1500 cm² (232.5 in²) Tail surface area: 69.75 in² / 450 cm²Features:Low Aspect Ratio Front wing Better low-end light wind performance, stable, perfect for discovering the sports. Plug-and-Play: One hull, one front wingwing, one mast, one stabiliserFront wing sizes adapted to the weight of the rider 2000: <80-100 kg +Mast, fuselage, plate, connector Mast 75 cm - Construction: AluminiumFront wing & stabiliser construction: Carbon sheathing.MARINE-GRADE HARDWARE - TORX 8 MM Strong and corrosion resistantPADDED CARRY BAG/COVERS For maximum protectionSuitable for:Discovery phase & progressionControl at low speedTurning and jibing with ease
The ensis PACER is for wing foilers with high performance requirements, from explorers to advanced pilots. As a freerider and paraglider addict, you will love the PACER. The optimised profile and the perfectly tuned outline of the front wing offer early and light lift. The foil lifts you gently and you are flying and enjoying the high stability and smooth control that the PACER offers. The front and rear wings are perfectly balanced and thanks to the winglets you fly as if on rails. The excellent gliding characteristics help you glide through your turns. The light lift, high speed, stability and control ensure high performance in all wind conditions. Specification:PACER 1700 Wing sizes: 1.8 - 6.0 m2 Weight of the rider: 45 - 65 kg Wind range: 12 - 45 knots Front wing area: 1400 cm2
Front wing span: 950 mm
Rear wing area: 450 cm2
Rear wing span: 465 mm
Fuselage: 70 cm
Mast: 82 cm carbon High Modulus TPPACER 2000
Wing sizes: 2.5 - 6.9 m2 Weight of the rider: 50 - 100 kg Wind range: 6 - 35 knotsFront wing area: 2000 cm2
Front wing span: 1100 mm
Rear wing area: 450 cm2
Rear wing span: 465 mm
Fuselage: 70 cm
Mast: 82 cm carbon High Modulus TPPACER 2400 Wing sizes: 2.5 - 6.9 m2 Weight of the rider: 75 - 120 kgWind range: 4 - 20 knots Front wing area: 2400 cm2
Front wing span: 1250 mm
Rear wing area: 450 cm2
Rear wing span: 465 mm
Fuselage: 70 cm
Mast: 82 cm carbon High Modulus TPTechnical characteristics: Light and stiff The 82 cm carbon mast is the perfect length for pumping and gliding through the waves. Mounting plate for foil positioning optionsMount the foil in any double us-box and position it according to your weight, riding style and wind conditions. Mounting memory system Found the optimum foil position? The brass nuts can be fastened with the small grub screws in the us-box. Simple and secure fasteningThe M8 stainless steel screws and the supplied Allen key allow easy and firm attachment to the board.Suitable for:
PACER 1700 For light riders and advanced ridersPACER 2000 For explorers to advanced ridersPACER 2400 For light wind and heavier riders
2000 cm2 The Flite range with aluminium mast and fuselage focuses on the important discovery and progression phase, where plug-and-play accessibility, lift-off and stability in flight will quickly get you hooked on the thrill of wing foiling.The FLITE 2000 is equipped with a 1500 cm2 front wing, 450 cm2 rear wing and 75 cm mast length as Low Aspect Ratio (5.4) for better control and stability, perfect for beginners and advanced riders.
flight foil was designed and configured with the best materials available. The base, mast and fuselage are made of aluminium and the front and rear wings are made of military grade prepreg carbon fibre.
All front and rear wings, the T-bar and the fuselage are interchangeable, allowing you to fine-tune the equipment to your weight, riding style and conditions. The forged carbon mast base has slotted open ends for quick assembly and disassembly. It is also extremely durable.Specification:Mast length: 75 cm / 29 inchesFuselage length: 87 cm (34 inches)Front wing area: 2000 cm² / 310 in²Tail surface area: 69.75 in² / 450 cm²Features:Low aspect ratio front wing
Better low-end light wind performance, stable, perfect for exploring the sports. Plug-and-Play: One fuselage, one front wing, one mast, one stabiliserFront wing size adapted to the weight of the rider
2000: <80-100 kg +Mast, fuselage, plate, connector
Mast 75 cm - Construction: aluminiumMast, fuselage, plateSuitable for:
Discovery phase & progression
Control at low speed
Turns and jibes with ease
e, connector
Mast 75 cm - Construction: Aluminium
Marine-grade hardware - Torx 8 mm
Strong and corrosion-resistant
Padded carry bag/cover
For maximum protectionSuitable for:Discovery phase & progressionControl at low speedTacking and jibing with ease
Medium aspect ratio for ease of use and manoeuvrability.
Mustache rear wing for directional stability and ease of use.
Versatile performance and control at high speeds.For riders looking for the perfect balance of performance, ease of use and ultimate manoeuvrability, the Tracer hydrofoil series offers the ability to ride the cleanest lines with intuitive ease. Features:
MEDIUM EXTENSION RATIO
The Tracer series features a medium aspect ratio for ease of use, manoeuvrability and versatile performance. 71CM STEALTH HULL The 71cm hull's longer effective cadence provides a more stable platform for general freeride useand progression.
The unique Stealth hull minimises drag while maximising stiffness, while the fluid dynamics minimise the oscillations that occur with a round hull, resulting in increased stability. TRIMMABLE REAR WING
The rear wing allows quick adjustment of the trim angle to compensate for lift requirements for different rider levels, personal preferences and when using different wing configurations.
Medium aspect ratio for ease of use and manoeuvrability. Mustache tail wing for directional stability and ease of use. Versatile performance and control at high speeds.For riders looking for the perfect balance of performance, ease of use and ultimate manoeuvrability, the Tracer hydrofoil series offers the ability to ride the cleanest lines with intuitive ease. Features:MEDIUM ASPECT RATIOThe Tracer series features a medium aspect ratio for ease of use, manoeuvrability and versatile performance. 71CM STEALTH HULL The longer effective cadence of the 71cm hull provides a more stable platform for general freeride use and progression. The unique stealth fuselage minimises drag while maximising stiffness, while the fluid dynamics minimise the oscillations that occur with a round fuselage, resulting in increased stability. TRIMMABLE REAR WINGThe rear wing allows quick adjustment of the trim angle to compensate for lift requirements for different rider levels, personal preferences and when using different wing configurations.
The AK Plasma foil series has been developed in collaboration with top athletes such as Zane Schweitzer, the ultimate Waterman, to offer an extremely powerful board without compromise, with which you can chase the fastest waves on the ocean or pump with infinite glide. Features
The 61 cm hull offers high manoeuvrability and more efficient pumping with a shorter cadence compared to the 71cm hull. The unique stealth hull minimises drag while maximising stiffness, while the fluid dynamics minimise the oscillations of a round hull, resulting in increased stability. The trimmable rear wing allows quick adjustment of the trim angle to compensate for lift requirements for different rider levels, personal preferences and when using different wing configurations. Suitable for:
The high aspect ratio Plasma series from carbon is perfect for pump, glide and higher speeds. Angled tail wing for efficiency and pivoting turns. Short fuselage for manoeuvrability and pumping.
Medium aspect ratio for ease of use and manoeuvrability. Moustache rear wing for directional stability and ease of use. Versatile performance and control at high speeds.For riders looking for the perfect balance between performance, ease of use and ultimate manoeuvrability, the Tracer hydrofoil series offers the ability to ride the cleanest lines with intuitive ease.Features:MEDIUM ASPECT RATIOThe Tracer range features a medium aspect ratio for ease of use, manoeuvrability and versatile performance. 71CM STEALTH HULL The longer effective cadence of the 71cm hull provides a more stable platform for general freeride use and progression. The unique stealth fuselage minimises drag while maximising stiffness, while the fluid dynamics minimise the vibrations that occur with a round fuselage, resulting in increased stability. TRIMMABLE REAR WINGThe rear wing allows quick adjustment of the trim angle to compensate for lift requirements for different rider levels, personal preferences and when using different wing configurations.
foil User guide kite wake / Tow surf / pump pump wing supBeg. - Int.Beg. - Int.Beg. - Int.Beg. - Int.Beg. - Int.Beg. - Int.Tracer v2 85050 - 90kg50 - 90kgN/AN/A50 - 85kgN/ATracer v2 100065 - 100kg65 - 100kg50 - 70kg50 - 70kg55 - 90kgN/ATracer v2 130070kg +70kg +60 - 85kg60 - 80kg60 - 95kgN/ATracer v2 160080kg +80kg +75 - 90kg75 - 90kg65 - 100kg60 - 80kgTracer v2 1900N/AN/A90kg +90kg +75 - 110kg80 - 100kg
The FCARVE foil is our most powerful and well-rounded package in the entire Hover Glide line. It is the perfect blend of low-speed lift, high-speed efficiency, overall manoeuvrability and pump capability. With the trend moving more and more towards high-aspect performance, the Quantum 85 wing offers all the benefits without sacrificing the low-speed lift and manoeuvrability that make slingshot foils so user-friendly and easy to ride. This foil is perfect for riders who already know how to foil and want to maximise their foil performance on the Hover Glide foil platform.Specifications:
Surface Area cm: 1476, Span mm: 856, Chord mm: 211, Aspect Ratio: 4.96
The package includes:72cm (28") mast, Quantum 85cm front wing, 42cm rear wing, hardware, washers, neoprene covers for the wings, travel case.
The ensis INFINITY wing foil has been developed for ambitious explorers through to experts who are looking for maximum performance on freeride, freestyle and wave. The INFINITY is easy to control and offers outstanding manoeuvrability and agility. It has a unique performance spectrum and offers a high maximum speed combined with amazing low-end lift. Two of the impressive features of this foil are the control you have when carving tight turns and the pop it achieves on take-off. The INFINITY wing foil is the perfect blend of playfulness and control to push your limits. It's time to dance and play on the water! Specification:
INFINITY 1100 Wing sizes: 1.8 - 5.2 m2 Rider weight: 45 - 80 kg Wind range: 12 - 45 knotsFront wing area: 1100 cm2
Front wing span: 800 mm
Front wing profile: 19 mm
Rear wing area: 265 cm2
Rear wing span: 425 mm
Fuselage: 70 cm
Mast: 82 cm carbon High Modulus TPINFINITY 1400 Wing sizes: 2.5 - 6.2 m2 Weight of the rider: 50 - 100 kg Wind range: 10 - 30 knots
Front wing area: 1400 cm2
Front wing span: 900 mm
Front wing profile: 20 mm
Rear wing area: 265 cm2
Rear wing span: 425 mm
Fuselage: 70 cm
Mast: 82 cm carbon High Modulus TPINFINITY 1800 Wing sizes: 2.5 - 6.9 m2 Weight of the rider: 75 - 115 kg Wind range: 8 - 20 knots Front wing area: 1800 cm2
Front wing span: 1000 mm
Front wing profile: 22 mm
Rear wing area: 265 cm2
Rear wing span: 425 mm
Fuselage: 70 cm
Mast: 82 cm carbon High Modulus TPFeatures: For ambitious explorers to expertsUnlimited carving Ultra popPlaning and spray Speed and tight turns in the wave Wide wind rangeTechnical features: Light and stiff The 82 cm carbon mast is the perfect length for pumping and planing through the waves.Mounting plate for foil positioning options Mount the foil in any double us-box and position it according to your weight, riding style and wind conditions. Mounting memory system Found the optimum foil position? The brass nuts can be fastened with the small grub screws in the us-box.Simple and secure fastening The M8 stainless steel screws and the Elan spanner supplied enable simple and secure attachment to the board. Suitable for: INFINITY 1100 Max. Power for lighter ridersINFINITY 1400 Max. High wind power for heavier ridersINFINITY 1800 Max. Light wind performance for light to medium riders